UP1- j 24v rubber impeller pump 28l/min – code: 16200413 – Marco

UP1-J 24V Marco – Self-priming electric pump with rubber impeller (code 16200413)

The UP1-J by MARCO S.p.A. (supplier product code 16200413) is a self-priming electric pump with rubber impeller, designed for typical onboard applications where reliability, ease of installation, and practical maintenance management are needed. It is a solution suitable for operations such as bilge pumping and the handling of grey water on boats of various types, maintaining a construction approach oriented to use in a marine environment.

This version operates at 24 V direct current (DC) and integrates useful installation features: internal brush holder with EMI noise filter, waterproof cover and watertight cable gland. The pump is also indicated as compliant with ISO 8849 and ISO 8846, as reported in the available documentation.

Features and construction details

Type and main components

• Self-priming electric pump with rubber impeller, suitable for applications where autonomous priming is useful.
• Power Supply: 24 V (DC).
• EMI interference filter integrated in the internal brush holder, useful for reducing electrical interference in onboard systems.
• Waterproof cap and watertight cable gland, designed for protection and operational continuity in environments exposed to moisture and splashes.

Available data (from product table)

Below are the parameters listed for the model UP1-J with code 16200413:

• MAX absorption: 6 A
• Fuse: 7.5 A
• MAX flow rate: 29 l/min
• Priming: 1.5 m
• MAX pressure: 1.25 bar
• O-Ring: NBR
• Sealing: HNBR
• Ports (BSPP): , in the
• Tube: 20 mm
• IP protection: 67
• Motor power: 150 W
• Weight: 1.8 kg

Compliance and references

The available description indicates ISO 8849 and ISO 8846. For specification requirements or document verification, it is advisable to refer to the manufacturer's documentation associated with the code 16200413.

Typical applications (nautical and onboard plant engineering)

The UP1-J is offered as the ideal pump for common activities on boats, particularly where practical handling of non-potable fluids and compact installation in technical spaces is required.

Examples of use

• Bilge pumping in the nautical field.
• Grey water management on boats.
• Localized maintenance and fluid transfer in onboard systems, when compatible with a rubber impeller pump.

Note: compatibility with specific fluids and operating conditions depends on the system and materials (NBR O-Rings, HNBR seal). In case of doubts, check with the manufacturer or the system's technical manager.

Operational advantages

The UP1-J offers a series of features that make it suitable for a professional context:

• Self-priming: useful in installations where the pump is not always under load or where commissioning is desired to be simplified.
• Protection and robustness for humid environments: waterproof cover, sealed cable gland and protection rating IP67 (data provided).
• Reduction of electrical interference: presence of EMI noise filter integrated in the brush holder.
• Format and installation: indicated connections (ports 3/8″ BSPP and hose 20 mm) for integration in onboard systems.
• Electrical management: indications of maximum absorption and fuse (6 A and 7.5 A) useful for sizing and circuit protection.

Usage and installation notes

Practical indications

• Power Supply: verify that the system is at 24 V DC and that wiring and protections are consistent with the indicated values (MAX absorption and fuse).
• Hydraulic connections: respect the planned connections (3/8″ BSPP) and the tube reference (20 mm) to avoid leaks or constrictions.
• Seals: the presence of NBR O-Ring and HNBR seal suggests attention to fluid compatibility and system operating conditions.
• Installation environment: even with protection IP67, it is good practice to install in a protected position and with correct cable passages, avoiding mechanical stresses on the cable gland.

Maintenance (general)

Rubber impeller pumps typically experience impeller wear depending on use and the fluid handled. To maintain consistent performance over time, it is advisable to schedule periodic checks and use suitable spare parts, referring to the product code 16200413 and the MARCO range.

Product summary

• Model: UP1-J
• Brand/Supplier: MARCO S.p.A.
• Code: 16200413
• Type: self-priming electric pump with rubber impeller
• Recommended use: bilge and grey water in nautical applications

FAQ – Frequently Asked Questions

What is the product code of the Marco UP1-J 24V pump?

The supplier product code reported for this version is 16200413.

Is the UP1-J self-priming?

Yes. The description indicates that it is a self-priming electric pump with a rubber impeller.

For which nautical applications is it suitable?

It is suitable for bilge pumping and grey water management on boats, as stated in the product description.

What are the main electrical and protection data available?

For model 16200413 the following are indicated: 24 V DC power supply, maximum current 6 A, 7.5 A fuse, and protection rating IP67.

What hydraulic connections does the pump have?

3/8″ BSPP ports and 20 mm hose reference are reported.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What is the product code of the Marco UP1-J 24V pump?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The supplier product code reported for this version is 16200413.”}},{“@type”:”Question”,”name”:”Is the UP1-J self-priming?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. The description indicates that it is a self-priming electric pump with a rubber impeller.”}},{“@type”:”Question”,”name”:”For which marine applications is it suitable?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is suitable for bilge pumping and grey water management on boats, as stated in the product description.”}},{“@type”:”Question”,”name”:”What are the main electrical and protection data available?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”For model 16200413 the following are indicated: 24 V DC power supply, maximum current 6 A, 7.5 A fuse, and IP67 protection rating.”}},{“@type”:”Question”,”name”:”What hydraulic connections does the pump have?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”3/8″ BSPP ports and 20 mm hose reference are reported.”}}]}