A/Clave Ecojet 2 B C.E. V.24 CC 0.37 kW - code: 01ECOCE21BNT - Gianneschi Pumps and Blowers

A/Clave ECOJET 2 B C.E. V.24 DC 0.37 kW Gianneschi: electronic autoclave for fresh water distribution onboard

The A/Clave ECOJET 2 B C.E. from Gianneschi Pumps and Blowers is an electronic autoclave system for pressurized fresh water distribution on boats and technical systems. This version is configured for 24 V direct current power supply (V.24 DC), with a nominal power of 0.37 kW, and is identified by product code 01ECOCE21BNT.

The system belongs to the ECOJET C.E. (Control Electronic) line, designed for automatic control and protection of the electric pump through pressure and flow sensors managed electronically. The following sheet reports only verified data or data present in the available technical documentation.

Main features and details

Identifying data

• Product: ECOJET 2 B C.E. Pump/Pressure Tank.
• Version: V.24 DC
• Brand / manufacturer: Gianneschi Pumps and Blowers
• Manufacturer code: 01ECOCE21BNT
• SKU: GIA000000547
• Category: Electronic pressure tanks / Pumps for marine systems

Power supply and motor

• Voltage: 24 V DC
• Power: 0.37 kW
• Insulation class: Class F
• DC motor protection rating: IP22

Intended applications

According to Gianneschi documentation, the ECOJET C.E. series is intended for:

• distribution of fresh water under pressure on boats;
• supplying utilities such as:
  • onboard kitchens,
  • showers,
  • sinks,
  • boilers,
  • technical water services.

The system is designed for marine and plant applications where DC power supply and automatic water pressure management are required.

Control Press electronic system

The standard system configuration includes:

• electronic pressure switch in technopolymer;
• pressure and flow sensors;
• non-return valve;
• electronic pump control;
• possibility of manual adjustment of starting pressure;
• stainless steel base on rubber antivibration mounts (on request).

The system replaces the traditional expansion tank and is described by the manufacturer as a solution designed to:

• reduce start/stop cycles;
• limit pump wear;
• maintain constant pressure during delivery;
• protect against dry running;
• reduce bulk;
• display the pump status;
• perform automatic reset upon power return.

Declared performance

For the model ECOJET 2 B C.E., the technical documentation states:

• Maximum flow rate: 55 l/min
• Restart pressure: 2.2 bar
• Maximum pressure: 3.5 bar

Declared performance according to EN ISO 9906 standard.

Construction of the ECOJET 2 B pump

For the ECOJET B version, Gianneschi declares:

• pump body in bronze;
• stainless steel support;
• diffuser and venturi in polycarbonate;
• impeller in special brass alloy;
• shaft in stainless steel AISI 316;
• mechanical seal in ceramic and stainless graphite.

L (mm):

Indicative dimensional data declared for ECOJET 2 B C.E.:

• Indicative dimensions (mm):
  • f: 425
  • h: 190
  • h1: 420
  • h2: 450
  • l: 230
  • m: 160
  • n: 160
  • c: 210
• Connections: 1” x 1”
• Weight: 20 kg

The manufacturer specifies that the dimensions are indicative and may vary depending on the installed engine and voltage.

Operational advantages

24 V DC version

The 24 V DC configuration is suitable for onboard systems that use continuous 24 V power supply, facilitating integration into existing nautical systems.

Clear component identification

The product code 01ECOCE21BNT allows to:

• reduce errors during ordering;
• simplify spare parts management;
• maintain consistency with onboard technical documentation.

System already configured and tested

The manufacturer states that the system is supplied calibrated and tested, without the need for initial adjustments during standard installation.

Recommended checks before purchase

Before replacement or installation, it is advisable to check:

• compatibility of the 24 V DC power supply;
• correspondence of the code 01ECOCE21BNT;
• 1” hydraulic connections;
• space available for installation and maintenance;
• compatibility with the existing system configuration.

In nautical and plant engineering contexts, installation and connections should be carried out by qualified personnel according to the manufacturer's instructions.

Quick summary

• Model: ECOJET 2 B C.E. Pump/Pressure Tank.
• Version: 24 V DC
• Power: 0.37 kW
• Declared maximum flow rate: 55 l/min
• Maximum pressure: 3.5 bar
• Connections: 1” x 1”
• Weight: 20 kg
• Product code: 01ECOCE21BNT
• Manufacturer: Gianneschi Pumps and Blowers

FAQ – Frequently Asked Questions

What is the supplier product code for this Gianneschi autoclave?

The supplier product code is 01ECOCE21BNT.

Is this version direct current (DC)?

Yes, the board indicates the 24 V DC version, therefore with direct current power supply.

What is the indicated power for A/Clave Ecojet 2 B C.E.?

The reported power is 0.37 kW.

For which contexts is this autoclave suitable?

It is suitable for technical systems and onboard applications where continuous current power supply and orderly management of the component during installation or replacement are required.

Where can I find performance data and sizing guidelines?

For performance and sizing, it is necessary to refer to the manufacturer's documentation and the specification of the system in which the component will be installed.