Maringas/SP 0.50 discharge pipe per linear meter – code: SCAS500000 – Toscogomma

Maringas/SP 0.50 exhaust hose per linear meter

(supplier code SCAS500000, supplier Toscogomma) is a solution designed for nautical uses where a dedicated conduit is required for exhaust gas discharge and to cooling of heat exchangers on ships and pleasure boats. The construction is designed to offer good handling during laying, being flexible and suitable for installations with limited bending radii, typical of engine compartments and onboard technical passages.

The sale per linear meter allows purchasing the length needed for your system, reducing waste and facilitating maintenance and replacement management. The product is suitable for those looking for a hose specific for marine applications, with materials and finishes consistent with exposure to sea water and weather agents.

Features and construction details

The Maringas/SP hose is made with a multilayer structure combining cover, underlayer and internal reinforcements. This architecture is designed for use in the nautical field and for handling fluids and conditions typical of onboard exhaust and cooling systems.

Cover (A)

The cover is in black rubber and is described as resistant to:

• abrasion
• sea water
• weather agents

The outer surface is corrugated with fabric impression, , a finish that can be useful in handling the pipe during installation and in areas where the duct is subject to contacts or rubbing typical of the onboard environment.

Underlayer (B)

The inner underlayer is smooth in black rubber and is indicated as resistant to:

• combustion gases
• sea water

The smooth internal finish is consistent with use on discharge lines and circuits connected to heat exchangers, where it is important to maintain a smooth passage inside the duct.

Inserts and reinforcements (C)

The reinforcement structure includes:

• 2 embedded metal spirals
• high tenacity synthetic textile inserts

This combination contributes to the stability of the pipe and the maintenance of shape in installations that require flexibility but also adequate structural support.

Packing

Recommended packaging: blue polyethylene.

Approvals and regulatory references

The tube is indicated as R.I.N.A approved according to:

• ISO 13363: 2006 Type 1 class A&B, Type 2 class A&B

The reference is also reported LLOYD’S SAE J 2006:03 (R1 and R2). For design needs, specifications or documentary checks, it is advisable to compare the plant requirements with the available technical documentation of the product.

Typical applications in the nautical field

The Maringas/SP discharge pipe is described as suitable for:

• exhaust gas discharge on ships and pleasure boats
• cooling of heat exchangers in onboard systems

In practice, it can be used in those sections of the system where the duct must coexist with limited spaces, mandatory passages and marine environmental conditions. The declared flexibility and the presence of metal spirals make it suitable for installations where the pipe must follow non-linear paths while maintaining good structural integrity.

Operational advantages

Some aspects of the product are particularly useful in the daily management of nautical systems:

• Flexibility: facilitates installation in technical compartments and in the presence of curves and complex passages.
• Reinforced structure: the combination of metal spirals and textile inserts supports use in demanding applications typical of discharge and circuits connected to heat exchangers.
• Materials oriented to the marine environment: cover and underlayer are indicated as resistant to seawater and atmospheric agents, recurring elements onboard.
• Purchase by linear meter: allows more precise length management, useful both during outfitting and maintenance interventions.

Usage and notes for installation/maintenance

For correct installation in the nautical field it is good practice to:

• verify that the pipe is used in the intended applications (exhaust gas discharge and heat exchanger cooling) and in accordance with the plant design;
• plan the route avoiding constrictions and excessive bends, exploiting the pipe's flexibility to achieve regular curves;
• periodically check the condition of the outer covering in areas subject to rubbing or contact with parts of the engine compartment;
• in case of replacement, measure the length and order the necessary quantity thanks to the sale per linear meter.

If you need to integrate the tube with fittings, clamps, or components of the existing system, it is advisable to check the dimensional compatibility and the tightening methods provided by your system, following the manufacturer's instructions and onboard procedures.

Product identification

• Product: Maringas/SP exhaust hose 0.50 per linear meter
• Supplier code: SCAS500000
• Supplier: TOSCOGOMMA 2.0 DEI F.LLI FIORINI SNC
• SKU: TOSC00000005

FAQ – Frequently Asked Questions

Is the tube sold in rolls or by the meter?

This item is offered per linear meter, so you can order the length needed for your system.

What uses is the Maringas/SP pipe suitable for?

It is suitable for the discharge of combustion gases and for applications related to the cooling of heat exchangers on ships and pleasure boats.

What is the structure of the tube like?

It consists of a black rubber cover with a corrugated canvas-impression surface, a smooth black rubber inner lining, reinforcements with 2 embedded metal spirals, and high-tenacity synthetic textile inserts.

Is the pipe suitable for the marine environment?

The description indicates resistance to seawater and weather agents, useful features for nautical installations.

What regulatory references/approvals are reported?

It is indicated as R.I.N.A approved according to ISO 13363: 2006 (Type 1 class A&B, Type 2 class A&B) and with reference LLOYD’S SAE J 2006:03 (R1 and R2).