Manual liquid transfer pump tube 15 mm – code: 52.739.00 – Osculati

Manual pump for liquid transfer Osculati – tube Ø 15 mm (code 52.739.00)

The manual pump for liquid transfer Osculati is a practical solution for transferring liquids from one container to another in an orderly manner, without using electrical power. It is designed for typical activities of maintenance and fluid management in the nautical and plant engineering field, where a simple, immediate, and easy-to-carry tool is needed on board or in the workshop.

The operation is based on triggering the flow and the subsequent transfer for gravity: once started, the transfer continues as long as the positioning conditions of the containers allow it. The pump is made of copper and is supplied complete with tube, so it is ready to use in the most common transfer operations.

Features and details

Construction and equipment

• Brand: Osculati S.r.l.
• Supplier product code: 52.739.00
• Copper pump
• Complete with tube (indicated length: 1.7 m)
• Tube Ø: 15 mm

Operating principle

The pump allows starting the transfer through a manual shaking/priming action. Once the liquid reaches the priming point (gooseneck of the tube), the transfer continues gravity towards the destination container, provided that the latter is positioned lower than the starting one.

Treatable liquids (based on available indications)

The product is described as suitable for transferring various types of liquids, including:

• Water
• Diesel
• Gasoline

For specific uses or particular liquids, it is good practice to check compatibility with materials and usage conditions expected by the application.

Typical applications

This manual transfer pump is indicated for operations where it is necessary to transfer liquids between containers in a simple and controlled way, for example:

• Transfer in the nautical field (management of onboard fluids during routine maintenance).
• Workshop and storage, when a manual and immediate system is useful.
• Transfer operations from jerrycans or containers to collection vessels, reducing the risk of dirtying the work area.

Advantages

Manual, simple, without power supply

Not requiring electrical power, the pump is suitable for contexts where a self-contained and ready-to-use tool is preferred. This also makes it useful as a support solution onboard or in situations where dependence on external power supplies is not desired.

Neater transfer

The priming and gravity transfer system is designed to help transfer the liquid avoiding dirt and keeping the operation cleaner compared to improvised methods.

Complete equipment

The presence of tube included allows the pump to be used without needing to find additional components for basic use. The tube diameter (Ø 15 mm) is a useful reference for evaluating insertion into containers and flow routing.

Usage and operational notes

How to start the transfer

1. Insert the pump into the container holding the liquid to be transferred.
2. Place the end of the tube in the destination container.
3. Place the second container at a slightly lower level than the first, to facilitate the transfer by gravity.
4. Shake the pump in the liquid to raise the fluid to the trigger point (gooseneck of the tube) and start the flow.

How to stop the flow

For stop the flow it is enough to remove the pump from the liquid, thus interrupting the conditions that maintain the transfer.

Practical advice

• Container stability: make sure both containers are stable and well positioned before starting the trigger.
• Height difference: gravity transfer requires the receiving container to be lower than the starting one.
• Cleaning after use: after the transfer, it is advisable to properly manage any residues and store the pump neatly.

Product identification

For assistance requests, reorder or comparison with other items, refer to Osculati and to code 52.739.00.

FAQ – Frequently Asked Questions

How do you start the transfer with this manual pump?

Insert the pump into the container with the liquid, place the end of the tube into the destination container (lower down), and pump in the liquid until priming: then the transfer continues by gravity.

How do you stop the flow during the transfer?

To stop the flow, simply remove the pump from the liquid, interrupting the conditions that maintain the transfer.

What is the diameter of the pump tube?

The product is supplied with a Ø 15 mm tube.

Does the pump require electrical power?

No. It is a manual pump and does not require electrical power.

What material is the pump made of?

The pump is made of copper and is supplied complete with tube (indicated length 1.7 m).