El/Pump Ecojet 1 B 24V DC 0.30 kW (code 01EJ111T) – Gianneschi

The Gianneschi Ecojet 1 B 24V DC is a self-priming jet electric pump of the ECOJET, series, designed for water pumping applications in technical systems and onboard systems. The model, identified by the code 01EJ111T, belongs to the range of electric pumps powered by direct current 24V DC and nominal power 0.30 kW.

It is a closed impeller pump with a venturi/diffuser system, designed to ensure self-priming capacity even under non-continuous suction conditions, according to the specifications of the ECOJET series.

Main features

• Model: Ecojet 1 B
• Product code: 01EJ111T
• Power Supply: 24V DC
• Rated power: 0.30 kW
• Rated speed: 2900 rpm
• Type: Self-priming jet electric pump
• Series: ECOJET (version B)

Construction and materials (ECOJET B series)

According to the manufacturer's specifications, the ECOJET B version is made with:

• Pump body in bronze with stainless steel support
• Diffuser and venturi in polycarbonate
• Impeller in special brass alloy
• Shaft in AISI 316 stainless steel
• Mechanical seal in ceramic and graphite

Performance (24V DC version – ECOJET 1 B)

Reference data from technical sheet:

• Maximum head: 28 m H₂O
• Operating range: up to about 100 l/min (according to performance curve)
• Variable performance: depending on flow rate, with progressive reduction of head

Applications intended for the ECOJET series

The ECOJET series is recommended by the manufacturer for uses such as:

• Chain washing
• Firefighting systems
• Water lifting and pressurization
• Air conditioning systems
• WC supply

The version ECOJET BB / B can also be used in contexts where seawater use is required, according to the declared construction configuration.

Operation

The ECOJET series electric pumps are self-priming jet pumps with venturi system. According to the documentation:

• Self-priming can reach up to 8 meters vertically
• At first start-up it is necessary to fill the pump body
• Subsequently the pump is able to prime even with an empty suction pipe

Installation of filter and foot valve (check valve) is recommended on the suction line is recommended.

Dimensions and physical data (Ecojet 1 B DC)

• Length: 400 mm
• Total height: 145 mm
• Body height: 130 mm
• Weight: 11 kg
• Connections: 1” suction / 1” delivery

Identification and traceability

For orders, spare parts or technical checks always use:

• Product code: 01EJ111T
• Series: ECOJET 1 B
• Internal SKU (if applicable): GIA000000234

Technical notes

• Performance data recorded under test conditions with suction at 1 m
• 60 Hz versions available on request
• The manufacturer reserves the right to change technical specifications without notice
• Dimensions are indicative and expressed in mm

FAQ – Frequently Asked Questions

What is the product code of the El/Pump Ecojet 1 B on this sheet?

The supplier product code shown is 01EJ111T. For orders and support requests, it is recommended to also indicate the SKU GIA000000234.

What power supply does the proposed Ecojet 1 B require?

This version is 24V DC (direct current). Before purchasing, check that the system has a 24V DC line.

What is the power rating indicated for this model?

The power listed on the sheet is 0.30 kW.

In what contexts is this pump typically used?

It is suitable for powering systems in technical environments and, in particular, for installations where 24V direct current power supply is available, such as in many onboard applications.

What should be checked for a correct replacement?

For a replacement, it is important to verify the correspondence of the code 01EJ111T and the 24V DC voltage with the documentation of the installed unit and the system.