Gianneschi CB 40-110 AIR centrifugal pump – 230/400 V – 0.75 kW – 3Ph

Supplier code: 01CB40G103 – SKU: GIA000000011

The Gianneschi CB 40-110 AIR is a centrifugal electric pump of the CB, designed for lifting and circulating clean water series (fresh or seawater) for onboard applications and technical systems.
It is part of the range of centrifugal pumps intended for services continuous where high lifts with medium prevalences, are required, such as sanitary systems, air conditioning, heating, cooling, and water systems.

This version is configured for is configured with with power consumption 0.75 kW.

Construction features (CB series)

• Pump body: bronze (cast iron on request)
• Impeller: bronze or special brass alloy
• Shaft: AISI 316 stainless steel
• Mechanical seal: ceramic / graphite / stainless steel
• Motor: class F insulation – IP44/55 protections for AC versions
• Available voltages for the series: 1~230 V and 3~230/400 V – 50/60 Hz

CB series pumps are not self-priming must be installed below the liquid level, as specified by the manufacturer.

Electrical data of version 01CB40G103

• Voltage: 230/400 V
• Frequency: 50 Hz
• Power: 0.75 kW
• Phases: 3Ph (three-phase)

These values are necessary to verify compatibility with the electrical panel and the onboard system.

Connections and configurations (CB series)

The CB range offers several construction variants. According to the documentation, the possible options are:

• Threaded BSP connections: from ½’’ to 1’’½
• Flanged connections: from DN32 to DN65

Since the series includes multiple setups, it is important to verify which configuration is associated with code 01CB40G103 or with the pump to be replaced.

Available performance 

For this version, a reference flow rate of 270/30 l/min is indicated.
The value is indicative: for a complete sizing, it is necessary to compare the pump curve provided in the manufacturer's documentation.

Typical applications (CB series)

The CB series is suitable for:

• Alimentazione sea water
• Circulation sea or fresh water
• Systems autoclave (if provided in system configuration)
• Sanitary and air conditioning systems
• Pressure increase in small water systems
• Systems of heating, cooling, and circulation

Operational advantages

• Materials compatible with fresh and sea water
• Robust construction for use in onboard technical systems
• Wide range with variants that facilitate maintenance and replacement in existing systems
• Possibility, at the series level, to choose different impellers and connections based on the system

Recommended checks before purchase

To ensure compatibility with the system, it is advisable to check:

• Model code: 01CB40G103
• Power supply and power: 230/400 V – 50 Hz – 3Ph – 0.75 kW
• Connection type: BSP threaded or flanged (depending on the installed version)
• Intended use: fresh/salt water circulation or supply
• Dimensions and mounting position, as the pump is not self-priming

Product identification

• Manufacturer: Gianneschi Pumps and Blowers
• Model: CB 40-110 AIR
• Supplier code: 01CB40G103
• SKU: GIA000000011

FAQ – Frequently Asked Questions

What is the product code of the CB 40-110 AIR pump?

The supplier code indicated for this model is 01CB40G103. The SKU GIA000000011 is also present on the card for internal reference.

What power supply does the EL/pump CB 40-110 AIR require?

It is indicated with voltage 230/400 V, frequency 50 Hz, power 0.75 kW, and three-phase power supply (3Ph).

For which applications is this Gianneschi pump suitable?

The listed applications include seawater supply, seawater/freshwater circulation, and use in autoclave systems, in the nautical and plant engineering fields.

What types of connections can the CB series have?

For the series, BSP threaded connections (from ½’’ to 1’’ ½) or flanged connections (from DN32 to DN65) are indicated. The actual configuration depends on the variant associated with the product code.