UP1 24v rubber impeller pump 35l/min – code: 16200213 – Marco

UP1 24V Marco – self-priming rubber impeller pump (code 16200213)

La UP1 24V by MARCO S.p.A. (supplier code 16200213) is a’self-priming water pump designed for technical applications where reliability, compactness, and simple system management are required. The UP1 series uses a self-lubricating rubber flexible impeller, a solution appreciated in nautical and system engineering for its ability to operate continuously and for generally immediate maintenance.

This version is powered by 24 V in direct current (DC) and is intended for onboard installations and 24V systems where a pump dedicated to water transfer and management is desired. The body is made of nickel-plated brass and the shaft of stainless steel, materials chosen for technical use and good durability over time in typical nautical operational contexts.

Features and technical details

Below are the available data for the model UP1 – code 16200213, useful for sizing and compatibility with the existing system.

Electrical data

• Voltage: 24 V
• Current type: DC
• Maximum current: 9 A
• Recommended fuse: 15 A
• Motor power: 180 W

Hydraulic performance (declared values)

• Maximum flow rate: 37 l/min
• Priming height: 1.5 m
• Maximum pressure: 1.5 bar

Construction, seals and materials

• Impeller: flexible self-lubricating rubber
• Body: nickel-plated brass
• Shaft: stainless steel
• O-Ring: NBR
• Seal: FKM

Connections and installation

• : BSPP Ports: 1/2″
• Tube: 25 mm
• Protection: IP67
• Weight: 2.9 kg

Typical applications

The UP1 24V is suitable for water systems where a self-priming pump with a flexible impeller is required. In nautical and plant engineering fields, it can be used, for example, as a service pump for water transfer and management operations, in dedicated circuits and with components consistent with the available flow rate and pressure values.

Common usage contexts

• Boating: onboard systems at 24V, water services and transfers in dedicated circuits.
• Maintenance and service: emptying/filling operations and water handling in technical systems.
• Mobile or stand-alone systems: where 24V DC power supply is available and a compact and easily integrable pump is desired.

Note: the pump is declared “for water”. For use with different fluids, it is advisable to check the compatibility of the materials (NBR/FKM and rubber impeller) with the fluid and operating conditions in advance.

Operational advantages

Some construction and configuration aspects make this model interesting for technical applications:

• Self-priming: facilitates starting in many system configurations, within the declared priming value.
• Self-lubricating rubber flexible impeller: typical solution for compact pumps, useful for practical management and targeted maintenance interventions.
• Materiali tecnici: nickel-plated brass body and stainless steel shaft, suitable for onboard contexts and demanding operating environments.
• Protection rating IP67: useful indication in installations where high protection against dust and temporary immersion is required.
• Standard connections: BSPP 1/2″ ports and 25 mm pipe indication for easier integration with common components.

Usage, notes, and integration tips

To achieve a neat installation consistent with the nameplate data, it is advisable to consider some practical points during selection and assembly.

Power supply and electrical protection

• Check that the system is actually at 24 V DC and that the line can handle the’maximum current draw indicated.
• Use appropriate protection: a 15 A fuse is recommended according to the available data.
• Take care of wiring and connections to reduce voltage drops and ensure smooth startups.

Hydraulic lines and fittings

• Respect the BSPP 1/2″ connections and the indication 25 mm pipe to avoid bottlenecks and unnecessary pressure losses.
• Install the pump in an accessible way for any checks and maintenance, especially when a flexible impeller is present.

Impeller management and maintenance

Flexible impeller pumps are often chosen also for targeted maintenance. In case of performance drop or irregularities, checking the impeller and seals (O-Ring NBR, seal FKM) is one of the typical operations. For spare parts and accessories, refer to the series and the product code 16200213 for correct identification.

Product identification

• Manufacturer: MARCO S.p.A.
• Model: UP1
• Supplier code: 16200213

If you are replacing an existing pump, always compare voltage, current type, connections, and declared flow/pressure values to ensure consistency with the system.

FAQ – Frequently Asked Questions

Is the UP1 Marco 16200213 pump suitable for 24V systems?

Yes. This model is powered by 24 V direct current (DC), so it is suitable for 24V DC systems and users.

What is the declared maximum flow rate of the UP1 24V?

The maximum flow rate indicated for this model is 37 l/min.

What type of connections does the UP1 pump have?

The ports are BSPP 1/2″. The 25 mm pipe indication is also provided for integration with the hydraulic line.

Which materials and seals are suitable for this model?

The body is made of nickel-plated brass and the shaft of stainless steel. O-Ring in NBR and seal in FKM. The pump uses a flexible impeller made of self-lubricating rubber.

What environmental protection does the pump have?

The indicated protection rating is IP67.