Twist whale shower hot/cold angled gray – code: 15.290.14 – Osculati

Twist Whale angled hot/cold shower gray Osculati (code 15.290.14)

The Twist Whale shower hot/cold with angled flange in color gray (Osculati code 15.290.14) is a practical solution for water management on board, designed to offer simple and immediate control. The adjustment of the’hot and cold water and of the’flow intensity is done by rotating the lower part of the shower body, with an intuitive action that facilitates daily use.

The body is made of ABS and features gray rubber edges designed to help protect the deck from accidental impacts. Installation is described as particularly simple thanks to a configuration that includes pre-installed quick couplings and a flange installable from the outside with a single circular hole.

Features and construction details

Adjustment by rotation (Twist)

The distinctive feature of the shower is the “twist” control: it rotating the lower part allows combined management of:

• mixing between cold and hot water;
• flow intensity (flow adjustment).

This control logic reduces operational complexity and makes use more immediate, especially in contexts where quick control with a single gesture is desired.

Declared flow rate

The shower is rated with high flow rate, equal to 8 l/min, for a water jet described as powerful. This data is useful for evaluating installation on board and for comparing alternative solutions during selection.

Materials and impact protection

The shower body is made of ABS, while the gray rubber edges are designed to limit impact in case of accidental contact with surrounding surfaces. The gray finish easily integrates with many deck configurations and technical areas.

Angled flange and external installation

This version is equipped with angled flange. Installation is indicated as simplified thanks to:

• flange installable from the outside;
• need for a single circular hole;
• special section tube with T fitting and pre-installed quick couplings.

These elements help speed up assembly operations and make connection management tidier, an aspect particularly appreciated in technical spaces or compartments with limited access.

Available sizes and data

• Minimum internal space: 150 mm
• Ø flange: 120 mm
• Hose length: 250 cm
• Package: Bulk/loose

Typical onboard applications

The Twist Whale hot/cold shower is suitable for applications where a shower head with mixing and quick control is needed, for example:

• deck showers for rinsing after bathing or for light cleaning;
• cockpit area and external areas where a water point with immediate adjustment is useful;
• washing and rinsing of equipment and surfaces, when you want to modulate the flow rate;
• integration into systems with a pre-arranged hot/cold line.

The presence of the angled flange it can be useful when the geometry of the installation point requires an oriented outlet or a more comfortable positioning for the user.

Operational advantages

Intuitive control and quick adjustment

Adjustment by rotating the lower part of the shower body allows direct intervention on temperature and flow, without going through separate controls. This approach is practical in onboard activities, where operations often take place in limited time and confined spaces.

Simplified installation

The combination of pre-installed quick couplings, T fitting and flange installable from the outside with a single circular hole it is designed to make installation more straightforward, reducing work and facilitating the organization of connections.

Surface protection

I rubber edges help limit the risk of marks or accidental bumps on the deck and nearby surfaces, a useful detail in contexts where the shower head is frequently handled.

Usage and installation notes

General usage instructions

To use, simply act on the lower part of the shower body by rotating it to achieve the desired mixing between hot and cold and to modulate the flow intensity. During use, it is good practice to store the shower head neatly to avoid bumps and keep the work area clear.

Notes for installation

• Check the available internal space in relation to the minimum indicated value (150 mm) before making the hole.
• Consider the Ø flange (120 mm) for the correct preparation of the seat and for aesthetic alignment.
• Manage the passage of the tube (250 cm) to avoid folds and interference with nearby components.
• The supply is in bulk/loose packaging: provide for content inspection before installation.

Product identification

Supplier: Osculati S.r.l.
Supplier product code: 15.290.14

FAQ – Frequently Asked Questions

How do you adjust the temperature and flow rate of the Twist Whale Shower?

The adjustment of hot and cold water and the flow intensity is done by rotating the lower part of the shower body, in an easy and intuitive way.

What is the declared flow rate of the shower?

The indicated flow rate is 8 l/min.

What material is the shower made of and what are the rubber edges for?

The body is made of ABS. The gray rubber edges are designed to protect the cover from accidental bumps during use and handling of the shower head.

What makes the installation “very easy” according to the description?

Installation is facilitated by the special section hose with T-connector and pre-installed quick couplings, as well as the flange installable from the outside with a single circular hole.

What are the available sizes for this version (code 15.290.14)?

For this version, the indicated dimensions are: minimum internal space 150 mm, flange Ø 120 mm, and hose 250 cm.