Hose holder type Rome M 2"x60 – code: 1056I*60 – Maestrini

Hose connector type Roma M 2"x60 Maestrini (code 1056I*60)

The hose connector type Roma M Maestrini is a fitting designed to connect a flexible line to a system in an orderly and functional way, in contexts where reliability and attention to detail are important. This version is identified by supplier code 1056I*60 and is indicated as 2"x60 according to the commercial product designation.

Offered in the field of hydraulics and fittings, it is a typical solution for installations and maintenance on technical systems, including those of nautical and onboard systems, where choosing the right fitting helps keep the system clean, inspectable, and consistent with service requirements.

Features and construction details

The product belongs to the family of hose connectors “type Roma” in the variant M. The term “hose connector” indicates a component designed for the insertion of a flexible tube, with geometry suitable to promote a stable coupling and correct positioning of the tube.

Product identification

• Brand / Supplier: Maestrini S.R.L. Sole Proprietorship
• Supplier product code: 1056I*60
• Commercial description: Hose connector type Roma M 2"x60

Material

The fitting is indicated in yellow brass. This material is commonly used in fittings for systems, thanks to good machinability characteristics and established use in technical applications. For the final choice, it is always advisable to verify the compatibility of the material with the fluid and the installation environment.

Format and configuration

The code 2"x60 is part of the model identification and helps recognize the correct variant within the range. When purchasing and replacing, it is good practice to compare this indication with the component already installed or with the system's bill of materials.

Typical applications

A hose connector is normally used when you want to connect a flexible hose to a point of the system in a practical and inspectable way. In nautical and system contexts, this type of fitting is often chosen for interventions such as:

• routine maintenance and replacement of flexible lines;
• creation or modification of sections with rubber tube or equivalent material;
• restoration of existing connections with an equivalent component in shape and size.

The choice of the correct variant depends on the type of tube used, the clamping system provided (for example with a clamp), and the system configuration. In case of doubt, it is advisable to compare the fitting with the one to be replaced or consult the system's technical documentation.

Advantages in installation and maintenance

• Orderly tube connection: helps guide the insertion of the hose and maintain a clean connection.
• Identifiable spare part: the presence of code and denomination (1056I*60 / 2"x60) simplifies spare parts management and purchase repeatability.
• Solution suitable for technical contexts: indicated for systems where components consistent with professional use are required.
• Material in yellow brass: a common choice in fittings, useful when a worked and robust metal component is desired.

In particular, in the nautical field, clarity in choosing the fitting and correct installation help keep the system easier to inspect over time, especially in technical spaces where accessibility and inspectability are important.

Use, assembly and operational notes

To achieve a correct connection with a hose fitting, it is essential to take care during the installation phase. Below are some general guidelines (to be adapted to your own system and onboard/workshop procedures):

Before installation

• Component verification: check that the code and variant correspond to the requested spare part (1056I*60, type Roma M, 2"x60).
• Tube inspection: ensure that the tube is suitable for the intended use and in good condition, without cracks or deformations.
• System compatibility: verify that the counterpart of the system and the available space allow the fitting to be mounted.

During assembly

• Tube insertion: insert the tube onto the hose fitting progressively, avoiding twists and bends that could stress the connection.
• Tightening: use an appropriate fastening system (e.g., clamp) and position it correctly according to the tube and insertion.
• Alignment: keep the tube aligned with the line, reducing tension and pulling on the fitting.

After installation

• Visual inspection: check that the tube is correctly positioned and that the tightening is uniform.
• Periodic check: in systems subject to vibrations or usage cycles, schedule regular connection checks.

Why choose this Maestrini hose fitting

This hose connector type Roma M it is a suitable choice when looking for a recognizable component consistent with technical use, with clear identification (code 1056I*60) and material in yellow brass. It is particularly useful as a spare part or as a component for system constructions where maintaining a homogeneous and easily manageable fitting line over time is desired.

To correctly complete the installation, always also evaluate the tube, fastening system, and system configuration, so as to obtain a clean connection suitable for the intended service.

FAQ – Frequently Asked Questions

What is the product code of the Maestrini hose holder?

The supplier product code indicated for this item is 1056I*60.

What material is the hose holder made of?

In the available data, the hose holder is indicated as made of yellow brass.

What does the term 2″x60 mean in the description?

2″x60 is the commercial designation of the hose holder variant mentioned in the title and item code. For the correct match, it is advisable to compare it with the component to be replaced or with the system documentation.

What uses is a hose holder like Roma M suitable for?

It is a fitting designed to connect a flexible hose to a system, useful in installations and maintenance on hydraulic and technical systems, including nautical contexts.

How do I check compatibility with my system?

Since no details are provided on threads or operating specifications, it is advisable to check the measurements and type of connection required by the system, as well as the compatibility of the tube and the intended clamping system.