Automatic europump next gen g 600 12v electric pump – code: 16.129.01 – Osculati

Europump Next Gen G 600 12V automatic electric pump (Osculati 16.129.01)

The’Europump Next Gen G 600 12V automatic electric pump is a compact solution for bilge water management and onboard drainage applications where automatic operation is desired. This version, identified by Osculati code 16.129.01, integrates a control system with Electronic timer sensing which performs periodic checks for the presence of water, simplifying installation and use in marine systems.

Designed for practical and tidy use, the pump is equipped with 360° rotatable hose connector and removable, thus facilitating tube orientation in tight spaces. It is also complete with a non-return valve (Back flow) to limit water return into the circuit after shutdown.

Features and technical details

Below are the main details related to this configuration (G 600 at 12V):

Configuration data (12V version / G 600)

• Power Supply: 12V
• Model: G 600
• Max flow rate: 38 l/min
• Consumption: 2.5 A
• Head: 2.5 m
• Hose holder Ø: 19/29 mm
• Supplier product code: 16.129.01
• Supplier: Osculati S.r.l.

Automation with Electronic timer sensing

The automatic sensor Electronic timer sensing is designed to test the presence of water with a timed logic: the pump performs a check every 2.5 minutes for 0.5 seconds. This approach allows automatic operation without the need for continuous intervention, proving useful in installations where the bilge needs to be monitored with an integrated system.

Connections and pipe orientation

The 360° rotatable hose connector and removable helps optimize the arrangement of connections: the adjustable orientation facilitates the passage of piping and the management of space, especially in technical compartments and hard-to-reach areas.

Check valve included

The pump is complete with check valve (indicated as Back flow), designed for prevent water return. In a drainage system this element can be important to limit backflows and maintain a more stable circuit between cycles.

References and declared compliance

The technical content associated with the product includes the following references:

• Certificate CE in compliance with the directive ISO 8846/8849
• According to standards ABYC C-1500/H-22

Optional accessories (90° hose holder)

For specific installation needs, optional 90° hose holders are indicated:

• 90° hose holder OPTIONAL – Ø 19 mm: 16.129.00
• 90° hose holder OPTIONAL – Ø 29 mm: 16.128.00

Typical applications

This automatic electric pump is suitable for nautical contexts where practical water management and automatic activation are required. Some common uses include:

• Bilge pump for the evacuation of water accumulated in lower compartments.
• Drainage in technical compartments or areas subject to infiltration or condensation.
• Integration into onboard systems where a compact component with integrated automatic control is desired.

The presence of the adjustable hose holder and the 90° option can be useful in installations where pipes and mandatory passages require more flexible solutions.

Operational advantages

While maintaining an essential technical setup, the Europump Next Gen G 600 12V offers some practical advantages for the installer and the user:

• Integrated automation: the timer sensing system manages water presence control with programmed intervals, reducing the need for manual supervision.
• Tidier installation: the 360° rotatable hose connector helps orient the discharge according to the available space.
• Backflow management: the check valve is a functional element to limit water return in the circuit.
• Compact solution: indicated when looking for an automatic bilge pump with compact dimensions and practical connections.
• Configuration options: availability of 90° hose connector optional (with dedicated codes) to adapt to specific layouts.

Usage and installation notes

To achieve a correct installation consistent with the onboard system, it is recommended to consider some practical aspects:

Choosing the correct version

This sheet refers to the version 12V G 600. Before purchase, it is good practice to verify that the boat's power supply and circuit configuration are compatible with the selected version.

Hydraulic connections

The connection requires the use of piping compatible with the 19/29 mm hose connector. The orientation rotatable 360° allows positioning the hose in the most suitable direction, reducing bends and tension. If the layout requires a tight curve or an angled outlet, consider adopting the optional 90° hose connector indicated in the accessory codes.

Automatic operation

The system Electronic timer sensing perform periodic checks: every 2.5 minutes for 0.5 seconds. During testing, it is useful to take this timed logic into account to correctly interpret activation cycles and verify that the discharge circuit is free.

Water backflow prevention

The presence of the check valve helps prevent water from re-entering the circuit. In installations with complex discharge routes or possible backflows, this component helps maintain more stable drainage management.

Product and spare parts identification

For technical requests, reorders, or compatibility checks with accessories, refer to the codes: 16.129.01 (pump) and, if necessary, 16.129.00 / 16.128.00 (optional 90° hose connectors). Keeping these references facilitates quick component identification.

FAQ – Frequently Asked Questions

Is this Europump Next Gen automatic or manual?

It is an automatic electric pump: it integrates an Electronic timer sensing system that tests for the presence of water at intervals (every 2.5 minutes for 0.5 seconds).

What is the power supply of this version (code 16.129.01)?

The version in this product sheet is 12V (model G 600).

What hose connector does the G 600 12V use?

A Ø 19/29 mm hose connector is specified, rotatable 360° and removable to facilitate tube orientation.

Does the pump include a check valve?

Yes, it is equipped with a non-return valve (Back flow) to prevent water from returning into the circuit.

Are accessories available for a 90° outlet?

Yes, optional 90° hose connectors are specified: Ø 19 mm (code 16.129.00) and Ø 29 mm (code 16.128.00).