UP6-p 24v peek gear pump 26l/min - code: 16406513 – Marco

UP6-P 24 V – Gear pump in PEEK (Marco) | Code 16406513

La UP6-P by MARCO S.p.A. (supplier code 16406513) is a’self-priming electric pump with gears designed for fluid transfer operations in technical fields, with a typical setup for onboard systems. The presence of gears in PEEK and a inline filter supplied as standard makes the product suitable for installations where a compact and tidy solution is desired, with components designed for use in maintenance and onboard services.

The body is indicated in nickel-plated brass and the shaft of stainless steel. The main applications reported include bilge e water transfer, in line with the typical needs of boating and light plant engineering.

Features and construction details

Type and power supply

• Type: self-priming gear electric pump
• Model: UP6-P
• Power Supply: 24 V DC

Main materials

• Gears: PEEK
• Body: nickel-plated brass
• Shaft: stainless steel

Seals and sealing components

• O-Ring: NBR
• Sealing: FKM

Connections and hydraulic installation

• Ports (BSPP): 1/2″
• Tube (mm): 16
• Filter: inline filter included

Declared data (version code 16406513)

• Max flow rate: 27 l/min
• Max pressure: 2 bar
• Priming: 1.5 m
• Max current: 8 A
• Fuse: 7.5 A
• Motor power: 180 W
• Protection: IP67
• Weight: 3.1 kg

Typical applications (nautical and onboard plant engineering)

According to the datasheet indications, the UP6-P is mainly used for:

• Bilge: water management and transfer operations on board.
• Water transfer: water movement within technical systems, where a self-priming gear pump is useful.

The format and equipment with inline filter they make it a practical choice when you want to integrate the component into an existing circuit, maintaining a clean and easily inspectable installation.

Operational advantages

• Complete solution: the presence of inline filter simplifies insertion into the circuit and helps manage impurities typical of systems.
• Construction oriented to the technical environment: body in nickel-plated brass and shaft in stainless steel are materials commonly chosen for onboard and maintenance applications.
• Specified seals: O-Ring NBR and sealing FKM allow clear evaluation of consistency with your system and maintenance procedures.
• IP67 protection: useful indication for contexts where there may be splashes or exposure to external agents (as declared).
• Standard connections: ports 1/2″ BSPP ports and hose indication 16 mm facilitate the choice of fittings and the line.

Usage and installation notes

General indications

For correct installation, it is good practice to verify system compatibility with the declared data (power supply, consumption, connections, and protection). In particular:

• Power Supply: use an 24 V DC adequate line and protect the circuit with 7.5 A fuse as indicated.
• Hydraulic line: respect the connections 1/2″ BSPP ports and the indicated tubing line, choosing fittings and pipes consistent with the system. 16 mm Inline filter:.
• install it in an accessible position for periodic checks and cleaning, according to operational needs. the declared value (.
• Priming: ) is a useful reference for the pump's placement relative to the source.1.5 m) è un riferimento utile per la disposizione della pompa rispetto alla fonte.

Maintenance (conservative approach)

In nautical and technical contexts, regular maintenance helps keep the system efficient. Without entering procedures not specified by the manufacturer, it is recommended to:

• periodically check the inline filter and remove any residues;
• check the condition of the seals (NBR O-Rings and FKM seal) in case of interventions or inspections;
• ensure that electrical connections are correct and protected, in line with the declared maximum absorption.

Product identification

For spare parts requests, assistance, or comparison with other versions, refer to:

• Manufacturer: MARCO S.p.A.
• Model: UP6-P
• Supplier code: 16406513

FAQ – Frequently Asked Questions

What is the supply voltage of the UP6-P pump code 16406513?

The UP6-P with code 16406513 is powered by 24 V direct current (DC).

Is the pump supplied with accessories?

Yes, the card indicates that the pump is complete with an inline filter.

What are the maximum declared flow rate and pressure for this version?

For version 16406513, a maximum flow rate of 27 l/min and a maximum pressure of 2 bar are declared.

What type of hydraulic connections does the UP6-P 16406513 have?

1/2″ BSPP ports are indicated and the indication for a 16 mm tube is reported.

Which materials are suitable for gears and seals?

The gears are made of PEEK; NBR O-Rings and FKM seals are recommended.