Teflub 500 ml - code: C2003 - Cfg

Teflub 500 ml (CFG) – dry anti-adhesive lubricant with PTFE

Teflub 500 ml (supplier product code C2003, technical lubricants line CFG) is a multifunctional synthetic fluid lubricant additivated with micronized PTFE (Polytetrafluoroethylene / Teflon). It is designed for maintenance interventions where lubrication, protection, and an anti-adhesive effect are needed, with a practical application in format aerosol spray.

The formulation combines a more fluid initial phase, useful for reaching difficult points, with a PTFE-based lubricating residue that remains on the surface after the volatile part evaporates. For this reason, it is a product appreciated in the nautical field and in workshops, where mechanisms are exposed to moisture, dirt, and frequent use.

Product features and details

Main data

• Manufacturer / Line: CFG (Technical Lubricants Line)
• Product code: C2003
• Package format: aerosol spray of 500 ml
• Chemical base: high penetrating synthetic fluid + micronized PTFE
• Appearance / color: slightly straw-colored translucent liquid
• Operating temperature: functional from -30 °C up to +220 °C

Declared functional properties

• Solvent properties: high unlocking and initial degreasing power
• Protective properties: dielectric, anticorrosive, water-repellent, anti-adhesive

Mechanism of action (in two phases)

The product's behavior is described in two operational moments, useful to understand why it is practical in maintenance:

• Fluid phase (capillary action): upon application, the carrier component makes the product more fluid and facilitates its penetration into cracks and gaps, for example on threads, meshes, pins, and sliding points.
• Solid phase (PTFE film): after the evaporation of the volatile part, a lubricating veil with PTFE remains that helps reduce friction and limit wear from rubbing (scuffing) on treated surfaces.

Behavior on dirt and moisture

• Dirt resistance: the residual layer is not sticky like many traditional greases and tends not to retain dust, sand, or carbon powder.
• Water repellency: helps to insulate surfaces from moisture and counteract corrosion and rust phenomena in exposed environments.

Recommended applications

Teflub is used in various maintenance contexts, especially where there are moving mechanisms, exposed metal parts, and the need for long-term protection.

Nautical and shipbuilding

• Shaft guides, mainsail trolleys, and sliding components
• Winches, tensioners, and small parts subject to humidity
• Onboard hinges and locks
• Linkages of outboard and inboard engines
• Marine sheaths and cables (gas / inverter)

Mechanics and workshop

• Drive chains (motorcycles, bikes, machinery)
• Exposed gears and mechanisms
• Sliding guides of machine tools
• Extractors and molds, exploiting the anti-adhesive properties of PTFE

Electricity (moisture protection)

• Protection from moisture of electrical contacts, battery terminals, and terminal blocks in compartments or engine bays

Note: The use on electrical components must always be evaluated based on the maintenance procedure and the conditions of the system; apply carefully avoiding excess and respecting good safety practices.

Maintenance advantages (practical approach)

• Quick application: Practical aerosol format for interventions onboard and in the workshop.
• Initial penetration: Useful when it is necessary to reach difficult points or mechanisms that are hard to access.
• Lubricating film with PTFE: Designed to reduce friction and wear from rubbing on treated surfaces.
• Non-stick effect: indicated where adhesion of residues and contaminants needs to be limited.
• Protection in humid environments: declared water-repellent and anti-corrosive properties, suitable for exposed contexts.
• Support on electrical parts: declared dielectric properties for moisture protection (with appropriate application precautions).

Usage and operational notes

To achieve a result consistent with the product characteristics, it is advisable to work methodically: surface preparation, controlled application, and verification of component operation.

General indications

• Preparation: if possible, remove dirt and residues before application, especially on sliding parts and areas prone to deposits.
• Application: spray targeted on the affected area, avoiding excess and drips.
• Setting time: allow the initial phase to act and wait for the volatile part to evaporate before putting into service, when necessary.
• Repetition: in scheduled maintenance, repeat the application based on the component's exposure (water, dust, frequent use) and the procedures adopted.

Compatibility and precautions

• Preliminary check: on delicate surfaces or special finishes, test first on a small, non-visible area.
• Security: use in a ventilated environment and follow the instructions on the label and in the manufacturer's documentation.

Product identification: Teflub 500 ml – CFG – code C2003. SKU: CFG000035.

FAQ – Frequently Asked Questions

What is Teflub CFG C2003?

It is a multifunctional synthetic fluid lubricant additive with micronized PTFE (Teflon), supplied in a 500 ml aerosol spray format.

What is the package size?

The package is a 500 ml aerosol spray.

What main properties are declared for this product?

Declared properties include solvents (unlocking and initial degreasing) and protective properties: dielectric, anticorrosive, water-repellent, and anti-adhesive.

In which fields is its use recommended?

It is suitable for nautical and shipyard use (guides, slides, hinges, locks, turnbuckles, linkages), for mechanical/workshop use (chains, exposed gears, sliding guides), and for protecting electrical contacts from moisture in exposed environments.

What is the declared operating temperature range?

The product is indicated as functional from -30 °C up to +220 °C.