Stainless steel wire bridge 6×57 mm – code: 39.322.06 – Osculati

6×57 mm stainless steel wire bridge Osculati (code 39.322.06)

The stainless steel wire bridge Osculati is a component of hardware designed to create neat and clean passage and fixing points on flat surfaces. This version is identified by the code 39.322.06 and is distinguished by the construction in stainless steel, with finish polished and manufacture wire printed, features that make it suitable for technical contexts where reliable materials and a refined appearance are required.

The profile “flush” is indicated when you want to limit protrusions and bulk, maintaining a discreet and functional installation. It is a typical solution in nautical and onboard systems, where order, accessibility, and cleanliness of the installation are as important as the component's robustness.

Features and construction details

Material and finish

• Stainless steel: material chosen for technical applications and demanding environments.
• Wire stamped: manufacture consistent with use as a compact anchoring/guide element.
• Polished: aesthetic and practical finish, useful when the component remains visible.

Format and product identification

• Type: stainless steel bridge on thread.
• Size: 6×57 mm (as per product denomination).
• Supplier code: 39.322.06.
• Brand: Osculati.

Note on dimensions

In the reference catalog, the family of bridges may include dimensional variants. This sheet refers to the version 6×57 mm associated with the code 39.322.06. During selection and installation, it is good practice to check the available space and the correspondence with the intended use.

Typical applications (nautical and plant engineering)

A wire bridge is commonly used as a passage or anchoring point for flexible elements or onboard accessories. The choice of stainless steel and polished finish makes it suitable for installations where the component may be exposed and where a tidy result is desired.

Examples of use

• Management and guidance of ropes, ties, or light stays, when a fixed reference point on the surface is needed.
• Mounting of accessories and small components, in setups where a low-profile solution is preferred.
• Sorting of passages on deck or in technical areas, to keep the arrangement of elements cleaner.
• Interior fittings (lockers, technical compartments, bulkheads), when a simple and strong anchoring point is desired.

Advantages in installation and maintenance

Flush profile: order and fewer protrusions

The configuration on thread is appreciated when you want to reduce the impact of the component on the surface: fewer protrusions mean a more discreet installation and, in many cases, better usability of the surrounding area (for example in narrow passages or work zones).

Stainless steel with polished finish

The use of’stainless steel is a typical choice for hardware intended for technical environments. The polishing contributes to a neat appearance and can facilitate normal cleaning operations, especially when the bridge is installed in visible areas.

Simple but “critical” component”

A bridge is an essential element: although it is a compact component, it often works as a connection point between different parts of the outfitting. Choosing an item identified by Osculati code 39.322.06 helps maintain consistency in supplies and replacements, especially in maintenance contexts.

Usage and operational notes

General installation instructions

The bridge is normally fixed on a flat surface using screws suitable for the support. For correct installation:

• verify that the surface it must be adequate and the thickness must allow a stable fixing;
• position the bridge so that the passage/anchoring is aligned to the element to be guided or held;
• avoid interference with other components and ensure there are no unwanted rubbing points;
• in nautical contexts, prefer screws and accessories consistent with use in a marine environment.

Routine maintenance

To keep the polished finish in good condition, periodic cleaning with products compatible with the’stainless steel and the surrounding surfaces is recommended. In case of installations subject to vibrations or stresses, periodically check the tightening of the screws and the general condition of the fixing point.

Choice of the correct variant

If you are comparing several similar bridges, refer to measurement and product code. This sheet concerns the version 6×57 mm identified as 39.322.06. In case of doubts about compatibility with your installation, it is useful to check the available dimensions and intended use before ordering.

FAQ – Frequently Asked Questions

What material is the Osculati 39.322.06 bridge made of?

It is made of stainless steel. The description also indicates that it is wire stamped and polished.

What does “wire bridge” mean?

Indicates a shape designed to reduce protrusions compared to the mounting surface, maintaining a more discreet and tidy installation.

What is the size of this version?

This sheet refers to the 6×57 mm version, associated with the Osculati code 39.322.06.

In what contexts is a stainless steel wire bridge typically used?

It is a hardware component used in nautical and onboard systems to create passage or anchoring points on flat surfaces, in visible areas or technical compartments.

How can I be sure to order the correct model?

Always check the size (6×57 mm) and the product code (39.322.06). When comparing similar variants, the code is the safest reference for identification.