Rubber-mount-kit FPB60/40 for Panda 4000S, 4200, 4800i – code: 0000681 – Fischer Panda

Rubber-mount-kit FPB60/40 Fischer Panda – replacement for installation and maintenance

The Rubber-mount-kit FPB60/40 Fischer Panda (code 0000681) is a set of elastic supports designed for the installation of the generator set on the base and onboard structure. It is a spare part component intended to maintain the correct support of the generator and contribute to the mechanical isolation between the machine and the hull, in a typical marine engine room context.

This kit is suitable for Fischer Panda generators Panda 4000S, 4200 and 4800i. When ordering and verifying the spare part, the safest reference always remains the part number 0000681, useful to avoid misunderstandings between variants and catalog updates.

Spare part features and details

The acronyms, clearly

• Rubber-mount-kit: literally “rubber support kit.” It is a set of feet/shock absorbers on which the generator set rests, serving as support and decoupling.
• FPB60/40: identification code of the type of support intended for this application. It is a useful reference to recognize the component family within Fischer Panda spare parts.
• Panda 4000S, 4200, 4800i: Fischer Panda generator models for which the kit is intended.
• Code 0000681: Fischer Panda part number for the unique identification of the spare part.

What is an elastic support kit for

During operation, a generator set produces vibrations which, if transmitted directly to the boat structure, can increase perceived noise and make onboard use less comfortable. The elastic supports serve to create a “cushioned” interface between the generator and the base, helping to limit the transmission of vibrations to the structure.

In a correct installation, the supports also help to keep the unit stably supported and consistent with the alignment intended by the manufacturer, an important aspect especially when performing maintenance or restoring an existing installation.

Why it is supplied as a “kit”

The supports work together: replacing only one can lead to uneven support and different mechanical behavior between the fixing points. For this reason, in maintenance contexts it is common to replace the entire set of supports provided, thus restoring homogeneous conditions.

Typical onboard applications

The Rubber-mount-kit FPB60/40 is used in contexts of nautics and onboard systems, particularly when working on Fischer Panda generators installed in technical spaces where vibrations, heat, and normal material aging can affect the elastic components over time.

• Scheduled maintenance%s: replacement of mounts during periodic interventions on the generator set.
• Restoration after disassembly%d: reinstallation of the generator following work on the engine, alternator, or auxiliary components.
• Intervention on noise/vibrations%: inspection and replacement of mounts when the installation shows signs of stiffening or failure of the elastic material.
• Refit or reconditioning$: updating of support components in case of plant overhaul or reorganization of the engine room.

Operational advantages (without forcing)

A properly selected and well-maintained mount kit helps keep the installation mechanically “cleaner,” with practical benefits in the daily management of the generator and the perceived quality on board.

• Reduction of vibration transmission#: elastic mounts help limit the transmission of vibrations to the structure.
• Better acoustic comfort1TP6T: fewer structural vibrations can result in a lower perceived noise level.
• Neater installation1TP7T: uniform mounts promote consistent support of the generator set.
• Identifiable spare part: the code 0000681 simplifies catalog verification and reduces the risk of error during ordering.

Use, replacement, and important notes

When to consider replacement

Elastic mounts include rubber parts that, over time, can harden, dry out o deform due to typical engine room conditions (temperature, constant load, normal aging, and possible contact with oil or fuel residues). In these cases, vibration transmission and the sensation of “rigidity” of the installation may increase.

Practical signs that often lead to a mount check:

• the generator appears noisier than usual under the same operating conditions;
• vibrations are felt more pronounced vibrations on the structure or in adjacent areas;
• you notice visual signs of wear, crushing or deterioration of the elastic material.

Good practices during intervention

• Code verification: before purchase, always compare the part number 0000681 with the documentation of your generator or with the exploded parts list.
• Replacement as a set: when required by maintenance, it is preferable to intervene on the entire set of supports to maintain uniform support.
• Installation check: after assembly, verify that the unit is correctly positioned and that there are no interferences or abnormal supports.
• Work environment: in the engine room, operate carefully in confined spaces and with hot components; if necessary, rely on qualified personnel.

Declared compatibility

This spare part is suitable for:

• Fischer Panda Panda 4000S
• Fischer Panda 4200
• Fischer Panda 4800i

To avoid incompatibilities due to variants or updates, refer to the code 0000681 and the documentation of your system.

FAQ – Frequently Asked Questions

What is the Fischer Panda spare part code for this support kit?

The Fischer Panda spare part code (part number) is 0000681.

For which generators is the Rubber-mount-kit FPB60/40 suitable?

It is suitable for Fischer Panda Panda 4000S, 4200 and 4800i generators.

What is a rubber mount kit used for on an onboard generator set?

It serves to support the generator and to reduce the transmission of vibrations to the structure, contributing to a more stable installation and lower structural noise.

When is it advisable to check or replace the rubber mounts of the generator?

When increased vibrations or noise are noticed, or signs of hardening, dryness, or deformation of the supports due to aging and the conditions of the engine room.

Why are the supports provided in kits?

Why the supports work together: replacing them as a set helps maintain uniform support and consistent mechanical behavior of the installation.