Black wool hull protection for 14-22 ropes pair – code: 06.315.01 – Osculati

Black wool hull protection for ropes 14/22 (pair) – Osculati 06.315.01

The Hull protection in genuine wool Osculati is an accessory designed to reduce the chafing of edge ropes in contact with the hull. In many operational situations (mooring, dock stops, rope passages near edges or painted surfaces) the rope can work and “mark” the hull: this protection helps create a soft barrier between rope and surface.

The product is supplied in couple and is made of black wool. It is designed for use with ropes of diameter 14/22 and features a length 60. The fastening is done with velcro closure with anti-slip tapes, to position the protection at the desired point along the rope and keep it in place during use.

Features and construction details

This hull protection is designed for practical use on board, with particular attention to ease of installation and handling during maneuvers. The choice of wool as the contact material is recommended when a soft surface between the rope and hull is desired.

Material and finish

• Material: real wool.
• Color: black.

Correct sizing: inner/outer diameter suitable for the fitting and routing.

• For ropes Ø: 14/22.
• Length: 60.

Fastening system

• Velcro closure for quick application and removal.
• Anti-slip tapes to help limit the movement of the protection along the rope.

Supply and product identification

• Supply: pair.
• Product code: 06.315.01.
• Brand / supplier: Osculati S.r.l.

Typical onboard applications

The hull protection is used when a rope may come into contact with the gunwale or other external surfaces during mooring or docking. It is also useful in situations where the rope, even if properly tensioned, can move due to wind, swell, or load variations.

Protection from rope chafing

• Reduction of direct contact between wire and hull.
• Support during maneuvers where the rope works near the gunwale.
• Use near passage points where the rope might “rub”.

Usage examples

• In combination with the dock lines used during mooring.
• When ropes may interfere with the side, for example in the presence of fenders or setups that cause the rope to work close to the hull.

Operational advantages

In a nautical context, surface care and orderly rope management are important aspects of routine maintenance. This wool protection offers a simple and immediate approach to adding a safeguard element at the most critical points.

Practical installation

• The velcro closure allows the protection to be applied without having to remove the rope or dismantle the mooring setup.
• The ability to position it at the desired point helps adapt it to different on-board configurations.

Position stability

• I anti-slip tapes are designed to help keep the protection where needed, reducing the need for frequent repositioning.

Management and reuse

• Dedicated accessory for hull protection during the use of ropes.
• Format suitable to be kept on board and used when necessary, depending on mooring conditions.

Use and notes

To achieve effective use, it is advisable to place the protection on the section of rope that comes into contact with the hull or works near the surface to be protected. The hook and loop closure allows you to wrap the protection around the rope and close it quickly.

Mounting instructions

• Identify the point where the rope tends to rub against the hull.
• Open the protection, wrap it around the rope and close it with the velcro closure.
• Check that the anti-slip tapes are properly resting to help hold it in position.

Selection notes

• Select this version when using ropes with a diameter 14/22.
• The finish black it is suitable for those who want a sober look consistent with many deck fittings.

Maintenance and care

To preserve the protection over time, it is good practice to periodically check the condition of the hook and loop closure and the cleanliness of the contact surface, especially after prolonged use or in demanding conditions. In case of dirt or residue buildup, gentle cleaning helps keep the protection ready for use.

FAQ – Frequently Asked Questions

What is the purpose of the wool hull protection for ropes?

It serves to reduce the rubbing of ropes against the hull, creating a soft barrier between rope and bulwark during mooring or stopover.

For which ropes is this Osculati 06.315.01 version suitable?

It is suitable for ropes with diameter 14/22.

How is the protection fixed on the rope?

It is applied by wrapping it around the rope and closing it with a tear closure; the anti-slip tapes help keep it in position.

Does the package include a single piece or a pair?

The product is supplied in pairs.

What is the length of the protection?

The indicated length is 60.