White cordura rope protector 18-24 pair – code: 06.316.02 – Osculati

White cordura rope protector 18/24 (pair) Osculati – code 06.316.02

The cordura rope protector Osculati is an accessory designed to protect ropes at points most subject to rubbing and wear during onboard use. Made of double-layer cordura and finished with perimeter edging, helps preserve the rope when working on surfaces, cable passages or contact areas where friction can be frequent.

This version is in white color, supplied in couple, , and is suitable for ropes Ø 18/24. The fastening is done with velcro closure and anti-slip straps, , to keep the rope protector in position during use.

Features and construction details

Double-layer high-strength Cordura

The body of the rope protector is made of double-layer cordura, , chosen to offer robust protection at points of greatest stress. The double-layer structure helps create an additional barrier between the rope and the contact surface, reducing the rope's direct exposure to abrasion.

Perimeter edging

The presence of the perimeter edging is a useful detail for a neat finish and to keep the rope protector's profile stable over time during normal onboard operations. It is also a practical element during positioning, as it helps better manage alignment on the section of rope to be protected.

Fastening with Velcro closure

The system of velcro closure allows quick installation without having to remove the rope or disassemble the equipment. This approach is particularly convenient when you want to quickly intervene on a rope already in use, for example to add protection at a specific point.

Anti-slip straps

I anti-slip straps are designed to help the rope protector stay in place, limiting movement along the rope during use. In practice, they help keep the protection where needed, especially when the rope works with tension variations or repeated movements.

Format and configuration

• Color: white
• For ropes Ø: 18/24
• Length: 600
• Supply: couple
• Brand: Osculati
• Product code: 06.316.02

Typical onboard applications

A rope protector is a simple but very useful component in the daily management of maneuvers and mooring lines. It is recommended when you want to protect a rope at points where rubbing, contact with edges, or repeated passages may occur.

Mooring

When moored, ropes can work against bollards, rings, fairleads, or dock surfaces. Using a rope protector helps reduce localized wear, especially when the rope remains under tension and can move slightly with wave motion or load variations.

Working lines and service ropes

On ropes used as service lines or for recurring operations, protection at contact points can be a practical measure to keep the rope in good condition and reduce the need for frequent interventions.

Passages over deck surfaces and equipment

When a rope passes through deck areas where it can rub or rest, the rope protector can be positioned at the critical point to create additional protection. The Velcro closure makes it easy to adjust the position based on the boat's configuration and the actual use of the rope.

Operational advantages

• Targeted protection: allows intervention on the most exposed section of rope, without modifying the entire line.
• Practical installation: The tear closure facilitates assembly and removal even on already installed rope.
• Stability in position: The anti-slip tapes help limit movement during use.
• Careful finish: Perimeter edging for a neat profile and better component management.
• Supplied in pairs: Useful for managing two protection points or two different ropes with the same item.

Use and notes

Size selection

This version is suitable for ropes Ø 18/24. To achieve a correct result, it is advisable to check the diameter of the rope and choose the corresponding size, thus ensuring proper closure and good stability in position.

Placement

Identify the point where the rope tends to rub (for example near a passage or recurring contact), wrap the rope protector around the rope and close with the velcro closure. If necessary, adjust the position to align the protective part with the contact area.

Periodic checks

As with all deck equipment, it is good practice to carry out periodic checks: verify that the rope protector is correctly positioned and that the closure is well adhered. In case of shifts, reposition it at the desired point.

Note on codes and identification

Product Osculati identified by Code 06.316.02. When reordering or requesting spare parts, referring to this code helps avoid ambiguity in selecting the correct variant (color and usage range for rope diameter).

FAQ – Frequently Asked Questions

Is this rope protector sold individually or in pairs?

This item is supplied in pairs.

For which ropes is this version suitable?

This variant is suitable for ropes Ø 18/24.

How is the rope protector fixed to the rope?

Attachment is done via Velcro closure; there are also anti-slip strips to help keep it in place.

What material is it made of?

It is made of double-layer high-strength cordura, with perimeter edging.

What is the Osculati product code?

The product code is 06.316.02.