Powder net – code: EPN7 – Euromeci

Powder Net Euromeci (code EPN7): acidic powder cleaner for boat maintenance

Powder Net by Euromeci (code EPN7) is a powerful cleaner acid-based, designed for cleaning and restoration typical maintenance operations in the nautical field. The formulation in powder allows you to prepare the solution at the time of use and to act specifically on various surfaces commonly found on board.

It is suitable for use on fiberglass, steel and teak, where it is used to remove deposits and oxidation marks and to restore the surface to a cleaner and more uniform appearance, following the correct application and rinsing methods.

Product features and details

Powerful acid-based cleaner

Powder Net is a cleaner product designed to tackle stubborn dirt and residues that, in a marine environment, tend to adhere to surfaces. The cleaning action is indicated when normal cleaning is not sufficient and a more incisive intervention is desired, maintaining a controlled and respectful approach to the materials.

Powder format to be diluted

The product is presented in powder and is used after dilution in water. This format is practical in maintenance because it allows preparing the necessary amount based on the work to be done and managing the application with common onboard or shipyard tools.

Recommended surfaces

• Fiberglass (gelcoat)
• Steel (including stainless steel)
• Teak

To achieve a consistent result and reduce the risk of halos or finish differences, it is advisable to work uniformly, without letting the product dry on the surface and rinsing thoroughly.

Type of dirt and treatable marks (based on available indications)

• Removal of encrustations
• Reduction of’yellowing from the gelcoat
• Removal of rust from stainless steel
• On teak: cleaning action with a whitening hydraulic renewal of the appearance

Applications in the nautical field

On a boat, surfaces are constantly exposed to salt spray, humidity, and contaminants that can leave visible marks and stubborn deposits. Powder Net is used as support in ordinary and extraordinary maintenance activities, especially when you want to intervene on:

• Fiberglassfor cleaning and removing yellowing and encrustations from the gelcoat.
• Stainless steelto treat rust marks and surface oxidations that may appear on accessories and components.
• Teakfor cleaning wood and restoring a clearer and more uniform appearance, following the indicated procedure.

It is a product typically chosen when a strong detergent is needed, to be used carefully and with a thorough final rinse, especially in contexts where different materials and delicate finishes are present.

Operational advantages

• Versatility of usesuitable for multiple common surfaces (fiberglass, steel, teak), useful for targeted interventions in different areas of the boat.
• Powder formallows you to prepare the solution on the spot and manage dilution according to the job.
• Simple applicationusable with brush and with a clear procedure (application, action time, rinsing).
• Intervention on typical deposits and markssuitable for encrustations, gelcoat yellowing, and rust on stainless steel; on teak, direct use in powder form on wet wood is also foreseen.

Usage and operational notes

Standard dilution and application

Powder Net is a powder to be diluted in water according to the available instructions: 50 g per liter. Once the solution is prepared:

• apply with brush on the surface to be treated;
• let act for 5 minutes;
• rinse with fresh water.

For a more uniform finish, it is good practice to distribute the product evenly and proceed with rinsing without delay, avoiding letting the detergent dry on the surface.

Application on teak in powder form (alternative indicated procedure)

The product can also be applied directly in powder form on wet teak. Then, follow the standard procedure (working with a brush, action time, and rinsing with fresh water). This method can be useful when a localized treatment on the wood is desired, always maintaining careful control of the detergent's action.

Important notes for correct use

• Acid-based product: use with care and adopt the usual operational precautions during handling and application.
• Thorough rinsing: rinsing with fresh water is an integral part of the process, especially on exposed surfaces and on materials with different finishes.
• Test on a limited area: in the presence of particularly delicate surfaces or with specific treatments, it is advisable to check the product's behavior on a small area before proceeding.

Product identification

• Brand: Euromeci
• Product code: EPN7

FAQ – Frequently Asked Questions

Powder Net Euromeci on which surfaces is it indicated?

Based on the available indications, Powder Net is suitable for fiberglass (gelcoat), steel (including stainless steel), and teak.

How is Powder Net diluted?

The product is in powder form and should be diluted in water according to the instructions: 50 g per liter.

How long should it act before rinsing?

After application with a brush, let it act for 5 minutes and then rinse with fresh water.

Does Powder Net remove rust from stainless steel?

Yes, among the indicated uses is the removal of rust from stainless steel, following the application and rinsing procedure.

Can Powder Net be used directly on teak?

Yes, it is indicated that it can also be applied directly in powder form on wet teak; subsequently, follow the standard procedure (working, action time, and rinsing with fresh water).