Plastic Buckle for 30 mm Screws - Code: 06.441.30 - Osculati</trp-post-container

Plastic buckle for 30 mm screws Osculati (code 06.441.30)

The plastic buckle for 30 mm screws Osculati, identified by code 06.441.30, is a practical accessory designed for managing and adjusting straps and ribbons in many onboard and technical situations. It is a solution indicated when a simple and neat closure is needed, with the possibility to fix the buckle with screws on a surface (for example a bulkhead or a support point), keeping the tape in position and facilitating tightening and release operations.

Thanks to its crosswise use, this buckle is commonly used for stop awnings, lock or hold cushions, and for the adjustment of straps in general. The format is designed to work with straps up to 30 mm, making it suitable for many typical configurations in marine hardware and onboard systems.

Product features and details

Format and compatibility with straps

The buckle is designed for use with straps up to 30 mm. This information is useful for correctly choosing the strap to pair and to avoid unsuitable combinations. During selection, it is advisable to check the actual width of the strap (especially if the strap is reinforced or has stiffer edges) to ensure smooth sliding.

Version: to be fixed to the hull with screws

This version is indicated as to be fixed to the hull with screws. Mechanical fastening allows creating a stable anchoring point for the strap, useful when a neat and repeatable solution over time is desired, for example in areas subject to frequent openings/closings or adjustments.

Note: screws and fastening hardware are not specified in the available data; it is recommended to choose the screws based on the support and application.

Material

The product is a plastic buckle. The choice of material makes it suitable for uses where a lightweight component that is easy to integrate with straps and belts is preferred, typically used for holding and adjustment.

Identification and supply

• Brand/Supplier: Osculati S.r.l.
• Supplier product code: 06.441.30
• Type: plastic buckle for screws
• For straps up to: 30 mm

For proper reorder and assistance management, it is always advisable to refer to the code 06.441.30, especially when multiple fastening points onboard need to be standardized or an existing installation replicated.

Typical applications (nautical and onboard plant engineering)

This buckle is suitable for various uses related to fastening and adjusting straps. In the nautical field, where order and quick intervention are important, a buckle fixed with screws can become a stable reference point for repetitive operations.

Awnings and covers stopper

A common use is as awning stops or to hold light covers with straps. Fixing with screws allows positioning the buckle at the most convenient point, thus guiding the strap and managing the tension easily during opening and closing.

Cushion locking and retention

The buckle can be used for retaining cushions or padded elements, where an adjustable strap helps maintain the desired arrangement. In these cases, the presence of a fixed screwed point facilitates strap alignment and reduces the need for improvised solutions.

Strap adjustment and onboard organization

Besides the more obvious uses, the buckle is useful for adjustment of straps in many situations: temporary fixings, containment strap management, or as a component of a custom retention system. It is an accessory that integrates well in maintenance and setup tasks, when a passage/closure point for a strap up to 30 mm is needed.

Operational advantages

Stable installation thanks to screw fixing

The ability to fixing the buckle with screws allows creating a dedicated and stable point. This is particularly useful when the strap is used frequently: the buckle stays in place and the operator can focus on strap adjustment without having to reposition the component each time.

Neat strap management

A dedicated buckle helps maintain order and consistency in the installation: the strap follows a defined path and the adjustment is more intuitive. In technical contexts, this results in faster interventions and better repeatability of adjustments.

Versatile solution for various uses

The product is designed for various uses (awnings, cushions, strap adjustment), so it lends itself to many customizations. It is a sensible choice when you want to standardize the fastening hardware for straps up to 30 mm, maintaining a simple and functional approach.

Usage and practical notes

Checking strap width

Before installation, check that the strap is up to 30 mm. If the strap is particularly stiff or has thick edges, it may be useful to do a passage test to ensure smooth sliding and easy adjustment.

Choosing the fixing point

Since the buckle is to be fixed with screws, it is important to identify an area with adequate and accessible support. In applications on bulkheads or edge surfaces, the position should allow maneuvering the strap without interference and with the tape path as linear as possible.

Mounting hardware

The screws are not specified in the available data. In general, the choice of screws depends on the support material and the type of installation. If the application is subject to frequent adjustments, it is advisable to adopt a fastening solution consistent with the context and the planned maintenance.

Maintenance and replacement

In case of replacement or expansion of the belt system, refer to code 06.441.30 to maintain uniformity. Periodic checks of screw tightening and belt condition help keep the installation neat and functional over time.

FAQ – Frequently Asked Questions

For what strap width is this buckle suitable?

It is indicated for use with straps up to 30 mm.

Is this version of the buckle to be sewn or screwed?

The indicated version is to be fixed to the hull with screws (screwable).

In which applications is it commonly used?

It is suitable for various uses such as awning stops, cushion retention, and strap adjustment.

What is the Osculati product code for this buckle?

The supplier product code is 06.441.30.

Is the fixing hardware included?

It is not specified in the available data; generally, the hardware is chosen based on the support and installation.