Panda Icontrol 2 circuit board – code: 0005922 – Fischer Panda

Original Fischer Panda spare part: Panda iControl 2 Circuit Board (code 0005922)

The Panda iControl 2 circuit board with supplier product code 0005922 is the main electronic control board (Control PCB) used in Fischer Panda systems with the iControl 2 (second generation) platform. It is a component intended for managing the command and supervision functions of the generator, installed inside the main electrical box (often referred to as Black Box).

In the nautical and onboard plant engineering field, this board is typically requested as a replacement when it is necessary to restore the control logic of the generator set, maintaining the original architecture of the iControl 2 system and its dedicated connections.

Component features and details

Product identification

• Supplier: Fischer Panda
• Supplier product code: 0005922
• Component name: main control unit / Control PCB
• Hardware platform: iControl 2 (second generation)

Power supply and communication

• Supply voltage: 12V DC (nominal, taken from the starting battery)
• Communication protocol: CAN-Bus (for connection to remote display and inverter modules)

Board protection

The board is indicated with tropicalization treatment (Conformal Coating) moisture-proof, a finish designed for use in environments where electronics may be exposed to typical onboard installation environmental conditions.

Safety inputs and command outputs

The Panda iControl 2 circuit board manages signals from sensors and controls devices/actuators related to the generator's operation.

Safety inputs

• Temperature sensors (e.g. KTY11)
• Oil pressure switch
• Speed sensor (Pick-up)

Command outputs

• Glow plug relay
• Starter motor relay
• Fuel pump

Main functions performed by the board

Within the iControl 2 system, the board 0005922 processes data from the generator and coordinates the main operational logics. In particular, the following functions are listed:

• Start-up and shutdown logic: management of the glow plug preheating timing (in multi-cylinder diesel engines) and excitation of the starter motor.
• Engine speed control: monitoring the alternator frequency or speed sensor data for managing the generator set operation.
• Alarm management (safety data): in case of abnormal sensor signals (e.g. temperature or oil pressure), the board intervenes by controlling the fuel pump power supply to stop the engine and prevent incorrect operating conditions.

Applications and installation context

This board is described as specific spare part installed in the main electrical box (Black Box) of the generator. It is intended for Fischer Panda systems equipped with digital control iControl 2, where communication with peripherals (such as remote display and inverter modules) takes place via CAN-Bus.

Compatibility indicated for iControl 2 systems

The reported compatibility concerns Fischer Panda generators equipped with the second-generation iControl digital control system, including:

• i series generators (variable speed inverters): Panda 5000i, 8000i, 10000i, 15000i, 19000i, 45000i.
• Standard fixed-speed generators (iControl versions): modern x-Series and Neo systems (e.g. 4000s Neo, 5000i Neo) configured with the iControl2 digital panel.

Note: for correct identification of the spare part, it is good practice to always check the code 0005922 and the presence of the system iControl 2 on the generator, in addition to the configuration of the Black Box and CAN-Bus connections.

Operational advantages (from a maintenance perspective)

In an onboard system, replacement with a board correct for platform and code allows maintaining the original architecture of the control system. In particular, this component is relevant when you want to:

• Restore the management of starting logics (preheating and start command) according to the iControl 2 configuration.
• Maintain CAN-Bus communication with remote display and connected modules provided by the system.
• Realign the management of safety inputs (temperature, oil pressure, speed) and command outputs (relays and fuel pump) as per the system.
• Use a spare part identified by supplier code, useful to reduce ambiguity during ordering and intervention.

Use, notes, and recommendations

The Panda iControl 2 circuit board is an electronic control component: installation and diagnosis are typically activities to be performed in a technical context, paying attention to wiring, connectors, and iControl 2 system configuration.

• Preliminary check: check that the generator is actually equipped with iControl 2 and that the requested replacement matches the code 0005922.
• Mounting context: the board is indicated as installed in the Black Box (main electrical box).
• Connections: consider the presence of connections CAN-Bus to remote display and inverter modules, as well as wiring for sensors and relays.
• Environment: the tropicalization treatment is designed for conditions with possible humidity; however, it is still advisable to operate carefully to avoid contamination and damage during maintenance.

If you are replacing the board following a malfunction, it may be useful to accompany the replacement with a check of the connected sensors (temperature, oil pressure switch, pick-up) and the controlled utilities (relays and fuel pump), so as to exclude external causes that may have generated the problem.

FAQ – Frequently Asked Questions

What is the spare part code for this iControl 2 board?

The supplier product code indicated for the Panda iControl 2 circuit board is 0005922.

Where is the Panda iControl 2 circuit board installed?

It is indicated as installed inside the main electrical box of the generator (Black Box).

What power supply does the 0005922 board use?

The reported supply voltage is 12V DC nominal, taken from the starting battery.

What type of communication does the iControl 2 system use with this board?

The CAN-Bus protocol is indicated, used for connection to the remote display and inverter modules provided by the system.

With which Fischer Panda generators is it compatible?

The reported compatibility concerns Fischer Panda generators equipped with the digital control system iControl 2, including models from the i series (e.g., Panda 5000i, 8000i, 10000i, 15000i, 19000i, 45000i) and some standard versions of the x-Series and Neo configured with the iControl2 digital panel.