Anode collar Max Prop 42 mm - Code: 5169242 - Motomarine

Collar anode Max Prop 42 mm Motomarine (code 5169242)

The’collar anode Max Prop 42 mm Motomarine, identified by code 5169242, is a replacement part designed for the galvanic protection of metal parts exposed in a marine environment. It is a zinc anode “collar” type, a practical solution when it is necessary to install the sacrificial element around a component with a compatible diameter.

Main data (from datasheet)

• Type: collar anode
• Material: zinc
• Inner diameter (Ø1): 42 mm
• Outer diameter (Ø): 92 mm
• Height (h): 25 mm
• Weight: 0.60 kg
• Supplier product code: 5169242
• Supplier: Motomarine S.R.L.

“Collar” type: what it means in practice

The collar type is typically chosen when the anode must wrap around a component with a circular section. When purchasing, the most important measurement to check is the inner diameter (Ø1), which in this case is 42 mm. The outer diameter and height also help define the size and compatibility with the available space.

Identification and correct replacement

For an orderly and certain replacement, it is advisable to refer to the code 5169242 and compare the measurements with the installed anode or with the documentation of your system. In maintenance contexts, the correspondence between code and dimensions helps reduce errors and downtime.

When it can be useful

• Scheduled maintenance: replacement of the consumed anode during periodic checks.
• Restoration of protection: after interventions on metal parts or replacement of components that require an anode to be positioned again.
• Compatibility check: when you want to maintain the same format and measurements as the anode already installed.

Note on compatibility

The name “Max Prop” identifies the family/use context, but the correct choice should always be confirmed through measurements (especially Ø1 42 mm) and code 5169242. If the installation has space constraints, it is also useful to consider Ø 92 mm and h 25 mm.

Why choose an anode with defined measurements

• Simpler selection: the declared dimensions help quickly compare the replacement with the original.
• Neat installation: a collar with a consistent internal diameter reduces the need for adaptations.
• Spare parts management: the unique reference (code 5169242) facilitates reordering and traceability in the workshop or onboard.

Material: zinc

The zinc is a material commonly used for sacrificial anodes in marine applications. The choice of anode material must be consistent with the environment of use and the system configuration; in case of doubt, it is advisable to follow what is provided by the existing setup or the technician's instructions.

General indications (without replacing the technician's instructions)

• Visual inspection: regularly check the condition of the anode and the presence of consumption.
• Dimensional check: before purchase or installation, check Ø1 42 mm and compare with the component on which it will be installed.
• Surface cleaning: make sure the contact surfaces are clean and free of oxidation or deposits that may interfere with contact.
• Replacement: replace the anode when it is significantly consumed, according to the adopted maintenance practices.

Advice for ordering the replacement

To avoid errors, always report code 5169242 when purchasing and verify that the measurements correspond to those required by the installation. If the previous anode is no longer readable or not available, dimensional comparison (Ø1, Ø and h) is the quickest method for an initial check.

Summary

The’Max Prop 42 mm Collar Anode Motomarine is a spare part in zinc with Ø1 42 mm, designed for nautical applications where a collar anode is required. With code 5169242, it offers a clear reference for spare part management and routine maintenance.

FAQ – Frequently Asked Questions

What material is the Motomarine 5169242 collar anode made of?

The anode is made of zinc, as indicated in the product sheet.

What is the inner diameter of the Max Prop collar anode?

The inner diameter (Ø1) is 42 mm. It is the main measurement to check for compatibility with the component on which it will be installed.

What are the other dimensions of the anode?

In addition to Ø1 42 mm, the anode has an outer diameter of Ø 92 mm and a height (h) of 25 mm.

What is the supplier's product code for this anode?

The supplier product code is 5169242.

How do I check if this anode is the right one for my installation?

It is recommended to compare code 5169242 and the measurements (Ø1 42 mm, Ø 92 mm, h 25 mm) with the installed anode or with the plant's technical documentation.