Conical ogive anode 30 mm - code: 5160030 - Motomarine

Motomarine conical ogive anode 30 mm (code 5160030)

The’conical ogive anode Motomarine is a spare part designed for use in the nautical field, where the protection of submerged metal parts is a central aspect of routine maintenance. This model, identified as conical ogive anode 30 mm and recognizable by the supplier product code 5160030, is described as ogive anode with conical fitting for propeller shafts.

Identification

• Type: ogive anode with conical fitting
• Recommended use: propeller shafts
• Reported size: 30 mm
• Supplier product code: 5160030
• Supplier: Motomarine S.R.L.

Shape and fitting

The ogive geometry is typical of anodes designed to integrate neatly with shaft line components, while the’conical fitting It is a common solution when a stable and consistent coupling with existing tapered seats is desired. When choosing, it is advisable to compare the shape and fitting with the removed part to avoid incompatibilities due to differences in profile or seat.

Selection note

For a correct choice, in addition to the indicated size and code, it is good practice to verify the correspondence with the existing replacement (shape, tapered seat, and positioning on the shaft). If the boat or propulsion group has variants, the reference to code 5160030 helps reduce ambiguities during ordering.

Typical applications in the nautical field

The conical ogive anode is suitable for contexts where installation takes place on propeller shafts. In general, anodes are consumable components used in the maintenance of metal parts exposed to the marine environment or immersion conditions, and are periodically replaced based on wear status and adopted maintenance procedures.

Where it is used

• Shaft line: applications on propeller shafts where an anode with an ogive profile and tapered seat is required.
• Routine maintenance: replacement of the component when it is worn or no longer suitable.

When to consider replacement

In maintenance, the replacement of an anode is normally evaluated during the boat's periodic inspections. If the anode appears significantly worn, deformed, or improperly fixed, it is advisable to plan replacement with an equivalent spare part in type and coupling.

Practical advantages

• Identifiable spare part: the presence of code 5160030 facilitates ordering and spare parts warehouse management.
• Targeted format: the configuration ogive with tapered fitting is designed for tapered seats on propeller shafts.
• Maintenance approach: component typically replaceable during scheduled maintenance activities.
• Consistency with the existing part: useful when you want to replicate the same installation solution (shape and coupling).

Before purchase

• Spare part verification: compare the anode to be replaced with the description “ogive with tapered fitting” and with the measurement 30 mm.
• Code check: if available in the documentation or on the existing spare part, use the reference 5160030 for a safer match.
• Application context: make sure the use is consistent with propeller shafts, as indicated.

During installation (general instructions)

• Seat cleaning: before assembly, check that the tapered seat is clean and free of residues that could compromise the fit.
• Correct positioning: the anode must be properly seated in its housing to avoid movement or misalignment.
• Periodic check: after installation, include the anode in routine checks, especially under demanding usage conditions.

Note: the sheet reports the essential available information. If you have doubts about compatibility with your configuration, it is advisable to check the installed spare part (shape and fitting) and refer to the code 5160030 when requesting.

FAQ – Frequently Asked Questions

What is a conical ogive anode on a propeller shaft for?

It is a maintenance component used on propeller shafts in the nautical field, where an anode with an ogive shape and conical fitting is provided. The correct choice depends on the shaft configuration and the available seat.

How do I identify the correct replacement for this anode?

Check the type (ogive anode with conical fitting), the indicated size (30 mm), and, if possible, compare the removed component. The reference to the supplier product code 5160030 helps reduce errors during ordering.

What does code 5160030 refer to?

5160030 is the product code of the supplier (Motomarine) associated with this conical ogive anode. It is useful for uniquely identifying the replacement and for support or reorder requests.

Is this anode suitable for any engine or shaft?

The card indicates use on propeller shafts with tapered coupling, but compatibility depends on the specific configuration and the existing tapered seat. In case of doubt, compare the shape and coupling with the existing replacement and use the code 5160030 as a reference.

How often should an anode of this type be replaced?

Replacement depends on the wear condition detected during periodic inspections and the maintenance procedures adopted. It is advisable to inspect it regularly and replace it when it is worn or no longer suitable.