Hose holder in hexagonal bar M 3/4"x16 in corrosion-resistant brass CR – code: 7156E*16T – Maestrini

Hose holder in hexagonal bar M 3/4″x16 in anti-corrosion brass CR Maestrini (code 7156E*16T)

The hex bar hose barb Maestrini is a fitting designed to neatly connect a flexible hose to a threaded connection point. This version is made in CR anticorrosion brass and features male connection with dimensional reference M 3/4″x16, as per product identification. The geometry in hexagonal bar facilitates gripping and tightening operations with common tools, making it suitable for maintenance and plant engineering contexts where practical and recognizable components are needed.

In technical fields (particularly in nautical and onboard plant applications), a hose holder is often chosen for its simplicity: it allows creating a connection between tube and fitting with a linear and easily inspectable configuration. The code 7156E*16T allows precise identification of the Maestrini variant and proper management of reorder and replacements.

Features and construction details

Type of fitting

• Hose clamp for connecting flexible hoses.
• Male connection (M), indicated in the datasheet as M 3/4″x16.
• Hexagonal bar body, useful for a stable grip during assembly.

Material

• CR anti-corrosion brass, selected for applications requiring good resistance to environments and typical plant conditions.

Product identification

• Manufacturer/Supplier: Maestrini S.R.L. Sole Proprietorship
• Supplier product code: 7156E*16T
• SKU: MAES000000225

Note on measurements

The wording 3/4″x16 is reported as the dimensional reference of the product. For a correct choice based on your system (threads, internal hose diameter, clamp type, and available space), it is advisable to verify the actual measurements required by the application and compare them with already installed components.

Typical applications

This hose connector is suitable for applications where a flexible hose must be connected to a male threaded point, maintaining a simple and easily manageable connection. In a context of nautics and onboard systems, it can be considered for technical lines and utilities where flexible hoses and threaded fittings are present, for example in maintenance, restoration, or creation of connection sections.

• Technical systems with flexible pipes and need for connection on male threading.
• Maintenance and replacement of existing fittings with equivalent component identified by code.
• Setups and repairs where a hexagonal grip is useful for tightening.

The choice of the correct fitting always depends on the type of fluid, system configuration, and specifications of the hose used. In the absence of further application data, it is advisable to follow project indications or equivalences of the already installed component.

Practical advantages

Functional format for assembly and maintenance

The hexagonal bar is a practical solution because it allows working with wrenches and tools in a more controlled way compared to smooth bodies, reducing the risk of slipping during tightening. This aspect is particularly useful when working in technical spaces or areas with limited access.

Material suitable for technical contexts

The’CR anticorrosion brass is commonly used in fittings for its suitability to many plant applications. In nautical and light industrial fields, the material choice is often oriented towards components that maintain good reliability over time under variable operating conditions.

Product code for spare parts management

The reference 7156E*16T allows identifying the correct version of the Maestrini component, simplifying procurement, replacement, and standardization of spare parts onboard or in the workshop.

Usage and installation notes

General indications

For a correct installation of a hose connector, it is important to pay attention to both the threaded part and the connection with the hose. In general:

• Check the thread compatibility with the counterpart of the system before assembly.
• Select an flexible hose suitable for the application and consistent with the dimensional reference of the hose connector.
• Use a clamp or a clamping system appropriate for the hose and the usage context, ensuring a stable fastening.
• Tighten the fitting with suitable tools using the hexagonal grip, avoiding unnecessary force.

Checks after installation

After installation, it is good practice to perform a visual check of the connection and verify that the hose is correctly positioned on the hose connector and that the tightening is uniform. In case of replacement of an existing component, it can be useful to directly compare geometries and dimensions with the removed fitting.

Important note

Operating conditions (type of fluid, temperature, pressure, vibrations, environment) influence the choice of components and installation methods. In the absence of additional specifications, follow the manufacturer's instructions and good installation practices.

Product summary

• Product: Hose connector in hexagonal bar
• Connection: Male (M) 3/4″x16
• Material: CR anti-corrosion brass
• Maestrini Code: 7156E*16T

If you need to replace an existing fitting, the safest way to confirm the choice is to verify the correspondence of the code and the dimensional references reported on the component or in the system's parts list.

FAQ – Frequently Asked Questions

What is a hex bar hose holder?

It is a fitting to connect a flexible tube to a threaded connection. The hexagonal bar shape offers a more comfortable grip for wrench tightening.

What is the material of this Maestrini hose holder?

The fitting is made of CR anti-corrosion brass, as indicated in the product description.

What is the product code of the hose holder?

The Maestrini supplier product code is 7156E*16T (SKU: MAES000000225).

What does the term M 3/4″x16 refer to?

It is the dimensional reference reported for this model with male connection (M). For the correct choice, it is advisable to verify compatibility with the thread and the tube of your system.

Is it suitable for marine and onboard systems?

It is a typical component of fittings used in technical systems, also in the nautical field. Compatibility must still be verified based on the system configuration and the components already installed.