Calibrated stainless steel false link 8 pins 8 mm – code: 01.672.08 – Osculati

Calibrated stainless steel connecting link 8 pins 8 mm Osculati (code 01.672.08)

The calibrated stainless steel connecting link Osculati is a component dedicated to the joining and management of chains in the nautical field, designed for applications where it is important to maintain smooth operation on the windlass system. This version is made of AISI 316 stainless steel and adopts a structure with 8 retaining pins, typical solution for calibrated links intended for use with winches.

The model in question refers to Ø 8 mm chain and is identified by the supplier code 01.672.08. In an anchoring system, choosing a calibrated and properly sized link contributes to a more consistent coupling with the sprocket, reducing the risk of irregular advancement.

Features and construction details

Material

The connecting link is made of AISI 316 stainless steel, material commonly used in marine environments for its suitability in the presence of moisture and salt. It is a recommended choice when uniformity of material with other stainless steel components of the onboard system is desired.

Structure with 8 pins

The configuration with 8 retaining pins is designed to provide a stable connection between the ends of the chain, maintaining a geometry suitable for the needs of calibrated chains for windlasses. This type of construction is aimed at promoting smooth passage on the sprocket, limiting conditions that can lead to jamming.

Calibration for winches and smooth running in the sprocket

Being a calibrated link for windlasses, it is designed to slide smoothly in the sprocket consistently with the calibrated chain. In a windlass system, smooth sliding is a practical aspect important both during lowering and recovery, especially when working in confined spaces or with frequent maneuvers.

Product sizing and identification

• Chain diameter (Ø D): 8 mm
• Supplier product code: 01.672.08
• Supplier: Osculati S.r.l.

Available dimensions (referring to the Ø 8 mm variant)

• A: 40.5 mm
• B: 26.5 mm

Breaking load (data available)

• Breaking load: 3200 kg

The indicated value is associated with the configuration selected in the provided data. When choosing, it is good practice to consider the entire system (chain, shackles, swivels, attachments, and windlass) and maintain consistency among the components.

Typical onboard applications

This connecting link is intended for contexts where calibrated chain Ø 8 mm is used with windlass/anchor winch and a dedicated connection is desired, with geometry suitable for passing over the sprocket. In particular, it can be used for:

• Joining sections of calibrated chain in anchoring systems.
• Maintenance interventions or restoring the chain line when it is necessary to replace or reconnect a section.
• Fittings and refitting where consistency between calibrated chain and connecting components is required.

In the nautical field, mechanical compatibility with the sprocket is a practical aspect: an unsuitable link can cause irregular dragging or jamming. For this reason, on systems with windlass, the choice of a calibrated connecting link is often preferred over generic solutions.

Operational advantages

• Smoother sliding on the sprocket: the calibration for winches is designed to follow the geometry of the chain and sprocket, reducing jamming situations.
• AISI 316 material: suitable for use in marine environments and consistent with onboard stainless steel components.
• Structure with 8 pins: construction solution aimed at a stable chain connection.
• Clear identification: Osculati code 01.672.08 useful for tidying up and managing spare parts.

Usage and important notes

Compatibility check

Before installation, verify that the chain is actually calibrated Ø 8 mm and that the windlass/sprocket system is set up for this size. In case of doubts about the installed chain (calibration, tolerances, or origin), it is advisable to perform a dimensional and functional check.

Assembly and checks

Installing a connecting link requires attention and careful assembly control. After installation, it is appropriate to:

• perform a sliding test on the sprocket at low speed/manual control, checking that there are no jams;
• periodically check the condition of the link and the joining points during regular maintenance of the anchoring line;
• keep the passage area clean (chain, sprocket, chain guide) to limit accumulations that can affect operation.

System consistency

For a reliable result, it is advisable to maintain consistency among the line components (calibrated chain, connecting accessories, and operating parts). If the link is replaced, also assess the general condition of the chain and other wear-prone elements.

Metfilm capacitor 3.15 microfarad 28 mm – Calibrated stainless steel 8-pin master link for Ø 8 mm chain – Osculati 01.672.08.

FAQ – Frequently Asked Questions

Is this connecting link suitable for 8 mm chain?

Yes, the described variant is suitable for Ø 8 mm chain (Osculati code 01.672.08).

What material is it made of?

It is made of AISI 316 stainless steel, suitable for use in marine environments.

Is it a calibrated link for windlasses/anchor winches?

Yes, it is a calibrated connecting link for windlasses and is designed to run smoothly on the sprocket, helping to reduce the risk of jamming.

What are the A and B dimensions for this version?

For the Ø 8 mm version, the dimensions available are: A 40.5 mm and B 26.5 mm.

What is the indicated breaking load for this configuration?

In the provided data, the selected configuration indicates a breaking load of 3200 kg.