Anode compatible with max-prop 28/35 mm propellers – code: 43.224.61 – Osculati

Anode compatible with Max-Prop 28/35 mm propellers (Osculati) – code 43.224.61

This anode compatible with Max-Prop propellers it is a spare part designed for the maintenance of the propeller and the metal parts immersed, in the nautical field. The product is identified by Osculati code 43.224.61 and is offered in the variant Dimensions and weight, a typical choice for seawater applications and contexts where galvanic protection via sacrificial anode is sought.

The sheet shows a configuration with shafts 28/35 mm and a selected description Ø internal 44 mm, with 6 holes. Before purchasing, it is advisable to verify the correspondence with your own propeller/hub and with the existing drilling.

Features and details

Product identification

• Brand / supplier: Osculati S.r.l.
• Supplier product code: 43.224.61
• Type: anode compatible for Max-Prop propellers
• Material variant: Dimensions and weight

Configuration indicated in this sheet

• Declared compatibility: for shafts 28/35 mm
• Selected description: Ø internal 44 mm, for shafts 28/35 mm
• Drilling: 6 holes

Variants present in the original description (for comparison)

The original content also includes other description and drilling options. If you are replacing an existing anode, it can be useful to compare these data with the part installed on board:

• Ø internal 42 mm, for shafts 28/35 mm
• Ø internal 39 mm, for shafts 25/28 mm
• Ø internal 44 mm, for shafts 28/35 mm (selected)
• Ø internal 47 mm, for shafts 35/45 mm
• Number of holes: 3 or 6 (in this sheet: 6)

Note: the presence of multiple options indicates that the anode family can vary by internal diameter and number of holes. Make sure to choose the correct combination for your installation.

Typical onboard applications

A propeller anode is normally used as a consumable component in routine maintenance. In particular, this replacement is recommended when you want to:

• Restore galvanic protection on Max-Prop propellers (declared compatibility).
• Replace a worn anode during periodic checks or hauling.
• Carry out maintenance interventions on the shaft/propeller line where the drilling and internal diameter correspond to the chosen version.

It is a typical component for pleasure boats and nautical applications where there are metal parts immersed subject to galvanic corrosion.

Operational advantages

• Identifiable spare part: the code 43.224.61 facilitates alignment with catalogs and spare parts lists.
• Targeted choice of geometry: the availability of multiple internal diameters and drillings (as per original content) helps to find the most suitable configuration for your hub/propeller.
• Zinc material: commonly adopted solution in the nautical field for sacrificial anodes, useful in typical sea use contexts.
• Simplified maintenance: the replacement of the anode is a recurring operation in the care of immersed parts and can be planned together with other onboard checks.

Usage and verification notes

Checks before purchase

• Shaft check: check that your application falls within the indicated compatibility 28/35 mm.
• Internal diameter: compare the value Ø internal 44 mm (or the possible correct alternative) with the existing component or with the propeller/hub specifications.
• Number of holes: make sure the required drilling is 6 holes (or 3, if provided by your installation).

Practical indications

When replacing, it is good practice to work on clean surfaces and verify that the anode is properly fitted to the intended seat. If the removed anode shows a hole or a different internal diameter, select the corresponding variant among those listed in the original description.

For compatibility doubts, it is advisable to refer to the Osculati code 43.224.61 and the indicated measurements (shaft, internal Ø, number of holes) before proceeding with the order.

FAQ – Frequently Asked Questions

Is this anode original Osculati?

The product is identified as Osculati (supplier Osculati S.r.l.) with code 43.224.61. The datasheet describes it as an anode compatible with Max-Prop propellers.

For which shafts is it indicated?

The configuration shown is for 28/35 mm shafts. The original content also includes other options for 25/28 mm and 35/45 mm shafts, to be chosen based on your installation.

What is the internal diameter of the version on this page?

The selected description indicates an internal diameter of 44 mm for 28/35 mm shafts. Other internal diameter options (39, 42, and 47 mm) are also listed depending on the variant.

How many holes does the anode in the shown configuration have?

This datasheet selects the version with 6 holes. The original content also indicates an alternative with 3 holes.

How do I choose the correct variant among those available?

Compare the part installed onboard (or the propeller/hub specifications) with the indicated parameters: shaft compatibility, internal diameter, and number of holes. If they do not match, select the corresponding variant.