Classic shock absorbers, 159 mm for 10-12 mm rope – code: 01.496.01 – Osculati

The’Classic Osculati shock absorber is an accessory designed for mooring management, useful when you want to make the rope's response to the typical stresses of dock or anchor mooring more “soft.” This model is offered in the size 159 mm and is suitable for ropes from 10–12 mm, product reference 01.496.01.

Material: EPDM rubber

The shock absorber body is made of EPDM rubber, a material commonly used in applications where good resistance to weather and saline environments is required. This construction choice makes it suitable for use in nautical contexts, where splashes, humidity, and salt spray are recurring conditions.

Dimensions and compatibility with the rope

• Length: 159 mm
• Rope range: 10–12 mm

Product identification

• Brand / supplier: Osculati S.r.l.
• Product code: 01.496.01
• Line: Classic

Typical applications in the nautical field

A rope shock absorber is normally used to help manage jerks and tension variations that can occur on the mooring line. In practice, it can be inserted on the rope to make the response to stresses more progressive, improving the overall mooring management in many operational situations.

Dock mooring

At the dock, the boat may be subject to repeated movements due to residual waves, backwash, or passing boats. The shock absorber can be a useful support in the rope setup, especially when a simple and immediate solution is desired to integrate.

Mooring on a buoy or fixed points

When fixed mooring points are present, managing the rope and its tension is an important aspect of the setup. A shock absorber can be considered part of the equipment, depending on the line configuration and the owner's preferences.

Use on dedicated ropes

This model is suitable for ropes from 10–12 mm. It can be considered for main or secondary mooring lines, depending on the boat's setup and available equipment. In case of doubts about the diameter choice, it is good practice to check the rope actually used and its condition (wear, stiffness, any splices).

Usage and operational notes

General installation instructions

For orderly use, the shock absorber should be chosen based on the rope diameter and inserted into the line according to the adopted mooring configuration. It is advisable to position it so that it works smoothly along the rope, avoiding twists or passages that could cause abnormal chafing.

Checks and maintenance

• Periodic inspection: check the condition of the rubber and any signs of wear.
• Rope inspection: a worn or stiff rope can affect the overall behavior of the mooring line.
• Cleaning: rinse when necessary to remove salt residues and surface dirt.

As with all mooring components, it is good practice to regularly check the entire line (ropes, loops, attachment points, and accessories) and replace elements that show obvious signs of deterioration.

Notes on model selection

This shock absorber is designed for ropes from 10–12 mm. If ropes with different diameters are on board, it may be useful to standardize the equipment or choose the shock absorber based on the rope actually used on that specific line. In case of doubt, the reference 01.496.01 helps to precisely identify the correct variant.

In summary: the’Osculati Classic Shock Absorber 01.496.01 in EPDM is a practical accessory for mooring, in the 159 mm format and for, 10–12 mm ropes.

FAQ – Frequently Asked Questions

What material is the Classic Osculati shock absorber made of?

It is made of EPDM rubber, suitable for use in marine environments and resistant to saltwater.

For which peaks is this model suitable?

This 159 mm shock absorber is suitable for ropes with a diameter of 10–12 mm.

What is the Osculati product code?

The product supplier code is 01.496.01.

In which situations is a rope shock absorber used?

It is normally used in mooring lines to help manage the loads on the rope in typical quay or fixed point conditions.

How can I recognize the correct variant for reordering?

To reorder the same version, refer to the Osculati code 01.496.01 and the specifications: 159 mm for ropes 10–12 mm.